From: Varalaxmi Bingi <varalaxmi.bingi@xxxxxxx>
Setting default i2c clock frequency for Zynq to maximum rate of 400kHz.
Current default value is 100kHz.
Signed-off-by: Varalaxmi Bingi <varalaxmi.bingi@xxxxxxx>
Signed-off-by: Michal Simek <michal.simek@xxxxxxx>
---
arch/arm/boot/dts/zynq-7000.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index cd9931f6bcbd..a7db3f3009f2 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -149,6 +149,7 @@ i2c0: i2c@e0004000 {
clocks = <&clkc 38>;
interrupt-parent = <&intc>;
interrupts = <0 25 4>;
+ clock-frequency = <400000>;
reg = <0xe0004000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
@@ -160,6 +161,7 @@ i2c1: i2c@e0005000 {
clocks = <&clkc 39>;
interrupt-parent = <&intc>;
interrupts = <0 48 4>;
+ clock-frequency = <400000>;
reg = <0xe0005000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
--
2.36.1
