Re: [PATCH] ARM: zynq: dts: Setting default i2c clock frequency to 400kHz

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02/05/2023 15:53, Michal Simek wrote:
> From: Varalaxmi Bingi <varalaxmi.bingi@xxxxxxx>
> 
> Setting default i2c clock frequency for Zynq to maximum rate of 400kHz.
> Current default value is 100kHz.
> 
> Signed-off-by: Varalaxmi Bingi <varalaxmi.bingi@xxxxxxx>
> Signed-off-by: Michal Simek <michal.simek@xxxxxxx>
> ---
> 
>  arch/arm/boot/dts/zynq-7000.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
> index cd9931f6bcbd..a7db3f3009f2 100644
> --- a/arch/arm/boot/dts/zynq-7000.dtsi
> +++ b/arch/arm/boot/dts/zynq-7000.dtsi
> @@ -149,6 +149,7 @@ i2c0: i2c@e0004000 {
>  			clocks = <&clkc 38>;
>  			interrupt-parent = <&intc>;
>  			interrupts = <0 25 4>;
> +			clock-frequency = <400000>;

I think this should be rather property of the board, because it depends
on I2C devices, right?

Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux