On Fri, 21 Apr 2023, Shengyu Qu wrote: > The AXP15060 is a PMIC chip produced by X-Powers, and could be connected > via an I2C bus. > > Describe the regmap and the MFD bits, along with the registers exposed > via I2C. Eventually advertise the device using a new compatible string > and add support for power off the system. > > The driver would disable PEK function if IRQ is not configured in device > tree, since some boards (For example, Starfive Visionfive 2) didn't > connect IRQ line of PMIC to SOC. > > GPIO function isn't enabled in this commit, since its configuration > operation is different from any existing AXP PMICs and needs > logic modification on existing driver. GPIO support might come in later > patches. > > --- You must not use these above the tags or Git will drop them. > Changes since v2: > - Rebase to AXP313a series v10 [1] + newest (20230420) -next branch > - Add axp_regulator_only_cells rather than directly using axp806_cells > for cases that IRQ line isn't connected. > > Changes since v1: > - Nothing > > [1] https://lore.kernel.org/linux-sunxi/20230401001850.4988-1-andre.przywara@xxxxxxx/ > > Signed-off-by: Shengyu Qu <wiagn233@xxxxxxxxxxx> > --- Put change-logs here instead. > drivers/mfd/axp20x-i2c.c | 2 + > drivers/mfd/axp20x.c | 107 +++++++++++++++++++++++++++++++++++++ > include/linux/mfd/axp20x.h | 85 +++++++++++++++++++++++++++++ > 3 files changed, 194 insertions(+) I manually added the missing tags for this and the DT patch and applied. -- Lee Jones [李琼斯]
