[PATCH v14 6/6] clk: meson: a1: add Amlogic A1 Peripherals clock controller driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Introduce Peripherals clock controller for Amlogic A1 SoC family.

A1 SoC has four clock controllers on the board: PLL, Peripherals, CPU,
and Audio.
This patchset adds support for Amlogic A1 Peripherals clock driver and
allows to generate clocks for all A1 SoC peripheral IPs.

Signed-off-by: Jian Hu <jian.hu@xxxxxxxxxxx>
Signed-off-by: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxx>
---
 drivers/clk/meson/Kconfig  |   10 +
 drivers/clk/meson/Makefile |    1 +
 drivers/clk/meson/a1.c     | 2273 ++++++++++++++++++++++++++++++++++++
 drivers/clk/meson/a1.h     |  114 ++
 4 files changed, 2398 insertions(+)
 create mode 100644 drivers/clk/meson/a1.c
 create mode 100644 drivers/clk/meson/a1.h

diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index 693c4cf60f27..dff576363b1f 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -109,6 +109,16 @@ config COMMON_CLK_A1_PLL
 	  device, A1 SoC Family. Say Y if you want A1 PLL clock controller
 	  to work.
 
+config COMMON_CLK_A1
+	tristate "Amlogic A1 SoC clock controller support"
+	depends on ARM64
+	select COMMON_CLK_MESON_DUALDIV
+	select COMMON_CLK_MESON_REGMAP
+	help
+	  Support for the Peripherals clock controller on Amlogic A113L based
+	  device, A1 SoC Family. Say Y if you want A1 Peripherals clock
+	  controller to work.
+
 config COMMON_CLK_G12A
 	tristate "G12 and SM1 SoC clock controllers support"
 	depends on ARM64
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 2f17f475a48f..0e6f293c05d4 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o
 obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o
 obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
 obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o
+obj-$(CONFIG_COMMON_CLK_A1) += a1.o
 obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
 obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
 obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o
diff --git a/drivers/clk/meson/a1.c b/drivers/clk/meson/a1.c
new file mode 100644
index 000000000000..51b50b3ff100
--- /dev/null
+++ b/drivers/clk/meson/a1.c
@@ -0,0 +1,2273 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ * Author: Jian Hu <jian.hu@xxxxxxxxxxx>
+ *
+ * Copyright (c) 2023, SberDevices. All Rights Reserved.
+ * Author: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxx>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include "a1.h"
+#include "clk-dualdiv.h"
+#include "clk-regmap.h"
+
+static struct clk_regmap xtal_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 0,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "xtal_in",
+		.ops = &clk_regmap_gate_ro_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap fixpll_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 1,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "fixpll_in",
+		.ops = &clk_regmap_gate_ro_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap usb_phy_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 2,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "usb_phy_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap usb_ctrl_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 3,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "usb_ctrl_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap hifipll_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 4,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "hifipll_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap syspll_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 5,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "syspll_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap dds_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 6,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dds_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap rtc_32k_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = RTC_BY_OSCIN_CTRL0,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "rtc_32k_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static const struct meson_clk_dualdiv_param clk_32k_div_table[] = {
+	{
+		.dual		= 1,
+		.n1		= 733,
+		.m1		= 8,
+		.n2		= 732,
+		.m2		= 11,
+	},
+	{}
+};
+
+static struct clk_regmap rtc_32k_div = {
+	.data = &(struct meson_clk_dualdiv_data){
+		.n1 = {
+			.reg_off = RTC_BY_OSCIN_CTRL0,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.n2 = {
+			.reg_off = RTC_BY_OSCIN_CTRL0,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.m1 = {
+			.reg_off = RTC_BY_OSCIN_CTRL1,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.m2 = {
+			.reg_off = RTC_BY_OSCIN_CTRL1,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.dual = {
+			.reg_off = RTC_BY_OSCIN_CTRL0,
+			.shift   = 28,
+			.width   = 1,
+		},
+		.table = clk_32k_div_table,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "rtc_32k_div",
+		.ops = &meson_clk_dualdiv_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&rtc_32k_in.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap rtc_32k_xtal = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = RTC_BY_OSCIN_CTRL1,
+		.bit_idx = 24,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "rtc_32k_xtal",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&rtc_32k_in.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap rtc_32k_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = RTC_CTRL,
+		.mask = 0x3,
+		.shift = 0,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "rtc_32k_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&rtc_32k_xtal.hw,
+			&rtc_32k_div.hw,
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+/*
+ * All clocks that can be inherited from a more accurate RTC clock are marked
+ * with the CLK_SET_RATE_NO_REPARENT flag. This is because in certain
+ * situations, we may need to freeze their parent. The parent setup of these
+ * clocks should be located on the device tree side.
+ */
+struct clk_regmap rtc = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = RTC_BY_OSCIN_CTRL0,
+		.bit_idx = 30,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "rtc",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&rtc_32k_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static u32 mux_table_sys[] = { 0, 1, 2, 3, 7 };
+static const struct clk_parent_data sys_parents[] = {
+	{ .fw_name = "xtal" },
+	{ .fw_name = "fclk_div2" },
+	{ .fw_name = "fclk_div3" },
+	{ .fw_name = "fclk_div5" },
+	{ .hw = &rtc.hw },
+};
+
+static struct clk_regmap sys_b_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SYS_CLK_CTRL0,
+		.mask = 0x7,
+		.shift = 26,
+		.table = mux_table_sys,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys_b_sel",
+		.ops = &clk_regmap_mux_ro_ops,
+		.parent_data = sys_parents,
+		.num_parents = ARRAY_SIZE(sys_parents),
+	},
+};
+
+static struct clk_regmap sys_b_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = SYS_CLK_CTRL0,
+		.shift = 16,
+		.width = 10,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys_b_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sys_b_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sys_b = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_CLK_CTRL0,
+		.bit_idx = 29,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sys_b",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sys_b_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sys_a_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SYS_CLK_CTRL0,
+		.mask = 0x7,
+		.shift = 10,
+		.table = mux_table_sys,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys_a_sel",
+		.ops = &clk_regmap_mux_ro_ops,
+		.parent_data = sys_parents,
+		.num_parents = ARRAY_SIZE(sys_parents),
+	},
+};
+
+static struct clk_regmap sys_a_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = SYS_CLK_CTRL0,
+		.shift = 0,
+		.width = 10,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys_a_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sys_a_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sys_a = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_CLK_CTRL0,
+		.bit_idx = 13,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sys_a",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sys_a_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sys = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SYS_CLK_CTRL0,
+		.mask = 0x1,
+		.shift = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys",
+		.ops = &clk_regmap_mux_ro_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sys_a.hw,
+			&sys_b.hw,
+		},
+		.num_parents = 2,
+		/*
+		 * This clock is used by APB bus which is set in boot ROM code
+		 * and is required by the platform to operate correctly.
+		 * Until the following condition are met, we need this clock to
+		 * be marked as critical:
+		 * a) Mark the clock used by a firmware resource, if possible
+		 * b) CCF has a clock hand-off mechanism to make the sure the
+		 *    clock stays on until the proper driver comes along
+		 */
+		.flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+	},
+};
+
+static u32 mux_table_dsp_ab[] = { 0, 1, 2, 3, 4, 7 };
+static const struct clk_parent_data dsp_ab_parent_data[] = {
+	{ .fw_name = "xtal", },
+	{ .fw_name = "fclk_div2", },
+	{ .fw_name = "fclk_div3", },
+	{ .fw_name = "fclk_div5", },
+	{ .fw_name = "hifi_pll", },
+	{ .hw = &rtc.hw },
+};
+
+static struct clk_regmap dspa_a_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DSPA_CLK_CTRL0,
+		.mask = 0x7,
+		.shift = 10,
+		.table = mux_table_dsp_ab,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspa_a_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = dsp_ab_parent_data,
+		.num_parents = ARRAY_SIZE(dsp_ab_parent_data),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap dspa_a_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = DSPA_CLK_CTRL0,
+		.shift = 0,
+		.width = 10,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspa_a_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_a_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspa_a = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPA_CLK_CTRL0,
+		.bit_idx = 13,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspa_a",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_a_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspa_b_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DSPA_CLK_CTRL0,
+		.mask = 0x7,
+		.shift = 26,
+		.table = mux_table_dsp_ab,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspa_b_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = dsp_ab_parent_data,
+		.num_parents = ARRAY_SIZE(dsp_ab_parent_data),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap dspa_b_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = DSPA_CLK_CTRL0,
+		.shift = 16,
+		.width = 10,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspa_b_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_b_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspa_b = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPA_CLK_CTRL0,
+		.bit_idx = 29,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspa_b",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_b_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspa_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DSPA_CLK_CTRL0,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspa_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_a.hw,
+			&dspa_b.hw,
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspa_en = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPA_CLK_EN,
+		.bit_idx = 1,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspa_en",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspa_en_nic = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPA_CLK_EN,
+		.bit_idx = 0,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspa_en_nic",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_a_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DSPB_CLK_CTRL0,
+		.mask = 0x7,
+		.shift = 10,
+		.table = mux_table_dsp_ab,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspb_a_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = dsp_ab_parent_data,
+		.num_parents = ARRAY_SIZE(dsp_ab_parent_data),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap dspb_a_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = DSPB_CLK_CTRL0,
+		.shift = 0,
+		.width = 10,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspb_a_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_a_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_a = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPB_CLK_CTRL0,
+		.bit_idx = 13,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspb_a",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_a_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_b_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DSPB_CLK_CTRL0,
+		.mask = 0x7,
+		.shift = 26,
+		.table = mux_table_dsp_ab,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspb_b_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = dsp_ab_parent_data,
+		.num_parents = ARRAY_SIZE(dsp_ab_parent_data),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap dspb_b_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = DSPB_CLK_CTRL0,
+		.shift = 16,
+		.width = 10,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspb_b_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_b_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_b = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPB_CLK_CTRL0,
+		.bit_idx = 29,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspb_b",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_b_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DSPB_CLK_CTRL0,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspb_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_a.hw,
+			&dspb_b.hw,
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_en = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPB_CLK_EN,
+		.bit_idx = 1,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspb_en",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_en_nic = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPB_CLK_EN,
+		.bit_idx = 0,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspb_en_nic",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap clk_24m = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CLK12_24_CTRL,
+		.bit_idx = 11,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "24m",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor clk_24m_div2 = {
+	.mult = 1,
+	.div = 2,
+	.hw.init = &(struct clk_init_data){
+		.name = "24m_div2",
+		.ops = &clk_fixed_factor_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&clk_24m.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap clk_12m = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CLK12_24_CTRL,
+		.bit_idx = 10,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "12m",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&clk_24m_div2.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap fclk_div2_divn_pre = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = CLK12_24_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div2_divn_pre",
+		.ops = &clk_regmap_divider_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "fclk_div2",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap fclk_div2_divn = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CLK12_24_CTRL,
+		.bit_idx = 12,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div2_divn",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&fclk_div2_divn_pre.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+/*
+ * the index 2 is sys_pll_div16, it will be implemented in the CPU clock driver,
+ * the index 4 is the clock measurement source, it's not supported yet
+ */
+static u32 gen_table[] = { 0, 1, 3, 5, 6, 7, 8 };
+static const struct clk_parent_data gen_parent_data[] = {
+	{ .fw_name = "xtal", },
+	{ .hw = &rtc.hw },
+	{ .fw_name = "hifi_pll", },
+	{ .fw_name = "fclk_div2", },
+	{ .fw_name = "fclk_div3", },
+	{ .fw_name = "fclk_div5", },
+	{ .fw_name = "fclk_div7", },
+};
+
+static struct clk_regmap gen_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = GEN_CLK_CTRL,
+		.mask = 0xf,
+		.shift = 12,
+		.table = gen_table,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "gen_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = gen_parent_data,
+		.num_parents = ARRAY_SIZE(gen_parent_data),
+		/*
+		 * The GEN clock can be connected to an external pad, so it
+		 * may be set up directly from the device tree. Additionally,
+		 * the GEN clock can be inherited from a more accurate RTC
+		 * clock, so in certain situations, it may be necessary
+		 * to freeze its parent.
+		 */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap gen_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = GEN_CLK_CTRL,
+		.shift = 0,
+		.width = 11,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "gen_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&gen_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap gen = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = GEN_CLK_CTRL,
+		.bit_idx = 11,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "gen",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&gen_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap saradc_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SAR_ADC_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "saradc_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .fw_name = "xtal", },
+			{ .hw = &sys.hw, },
+		},
+		.num_parents = 2,
+	},
+};
+
+static struct clk_regmap saradc_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = SAR_ADC_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "saradc_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&saradc_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap saradc = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SAR_ADC_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "saradc",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&saradc_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data pwm_abcd_parents[] = {
+	{ .fw_name = "xtal", },
+	{ .hw = &sys.hw },
+	{ .hw = &rtc.hw },
+};
+
+static struct clk_regmap pwm_a_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PWM_CLK_AB_CTRL,
+		.mask = 0x1,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_a_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = pwm_abcd_parents,
+		.num_parents = ARRAY_SIZE(pwm_abcd_parents),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap pwm_a_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PWM_CLK_AB_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_a_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_a_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_a = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PWM_CLK_AB_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pwm_a",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_a_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_b_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PWM_CLK_AB_CTRL,
+		.mask = 0x1,
+		.shift = 25,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_b_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = pwm_abcd_parents,
+		.num_parents = ARRAY_SIZE(pwm_abcd_parents),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap pwm_b_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PWM_CLK_AB_CTRL,
+		.shift = 16,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_b_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_b_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_b = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PWM_CLK_AB_CTRL,
+		.bit_idx = 24,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pwm_b",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_b_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_c_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PWM_CLK_CD_CTRL,
+		.mask = 0x1,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_c_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = pwm_abcd_parents,
+		.num_parents = ARRAY_SIZE(pwm_abcd_parents),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap pwm_c_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PWM_CLK_CD_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_c_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_c_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_c = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PWM_CLK_CD_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pwm_c",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_c_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_d_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PWM_CLK_CD_CTRL,
+		.mask = 0x1,
+		.shift = 25,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_d_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = pwm_abcd_parents,
+		.num_parents = ARRAY_SIZE(pwm_abcd_parents),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap pwm_d_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PWM_CLK_CD_CTRL,
+		.shift = 16,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_d_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_d_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_d = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PWM_CLK_CD_CTRL,
+		.bit_idx = 24,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pwm_d",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_d_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data pwm_ef_parents[] = {
+	{ .fw_name = "xtal", },
+	{ .hw = &sys.hw },
+	{ .fw_name = "fclk_div5", },
+	{ .hw = &rtc.hw },
+};
+
+static struct clk_regmap pwm_e_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PWM_CLK_EF_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_e_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = pwm_ef_parents,
+		.num_parents = ARRAY_SIZE(pwm_ef_parents),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap pwm_e_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PWM_CLK_EF_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_e_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_e_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_e = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PWM_CLK_EF_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pwm_e",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_e_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_f_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PWM_CLK_EF_CTRL,
+		.mask = 0x3,
+		.shift = 25,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_f_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = pwm_ef_parents,
+		.num_parents = ARRAY_SIZE(pwm_ef_parents),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap pwm_f_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PWM_CLK_EF_CTRL,
+		.shift = 16,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_f_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_f_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_f = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PWM_CLK_EF_CTRL,
+		.bit_idx = 24,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pwm_f",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_f_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+/*
+ * spicc clk
+ *   fdiv2   |\         |\       _____
+ *  ---------| |---DIV--| |     |     |    spicc out
+ *  ---------| |        | |-----|GATE |---------
+ *     ..... |/         | /     |_____|
+ *  --------------------|/
+ *                 24M
+ */
+static const struct clk_parent_data spicc_spifc_parents[] = {
+	{ .fw_name = "fclk_div2"},
+	{ .fw_name = "fclk_div3"},
+	{ .fw_name = "fclk_div5"},
+	{ .fw_name = "hifi_pll" },
+};
+
+static struct clk_regmap spicc_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SPICC_CLK_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = spicc_spifc_parents,
+		.num_parents = ARRAY_SIZE(spicc_spifc_parents),
+	},
+};
+
+static struct clk_regmap spicc_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = SPICC_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&spicc_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap spicc_sel2 = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SPICC_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc_sel2",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .hw = &spicc_div.hw },
+			{ .fw_name = "xtal", },
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap spicc = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SPICC_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "spicc",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&spicc_sel2.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap ts_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = TS_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ts_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap ts = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = TS_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "ts",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&ts_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap spifc_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SPIFC_CLK_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spifc_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = spicc_spifc_parents,
+		.num_parents = ARRAY_SIZE(spicc_spifc_parents),
+	},
+};
+
+static struct clk_regmap spifc_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = SPIFC_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spifc_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&spifc_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap spifc_sel2 = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SPIFC_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spifc_sel2",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .hw = &spifc_div.hw },
+			{ .fw_name = "xtal", },
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap spifc = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SPIFC_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "spifc",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&spifc_sel2.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data usb_bus_parents[] = {
+	{ .fw_name = "xtal", },
+	{ .hw = &sys.hw },
+	{ .fw_name = "fclk_div3", },
+	{ .fw_name = "fclk_div5", },
+};
+
+static struct clk_regmap usb_bus_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = USB_BUSCLK_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "usb_bus_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = usb_bus_parents,
+		.num_parents = ARRAY_SIZE(usb_bus_parents),
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap usb_bus_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = USB_BUSCLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "usb_bus_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&usb_bus_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap usb_bus = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = USB_BUSCLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "usb_bus",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&usb_bus_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data sd_emmc_psram_dmc_parents[] = {
+	{ .fw_name = "fclk_div2", },
+	{ .fw_name = "fclk_div3", },
+	{ .fw_name = "fclk_div5", },
+	{ .fw_name = "hifi_pll", },
+};
+
+static struct clk_regmap sd_emmc_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SD_EMMC_CLK_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sd_emmc_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = sd_emmc_psram_dmc_parents,
+		.num_parents = ARRAY_SIZE(sd_emmc_psram_dmc_parents),
+	},
+};
+
+static struct clk_regmap sd_emmc_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = SD_EMMC_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sd_emmc_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sd_emmc_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sd_emmc_sel2 = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SD_EMMC_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sd_emmc_sel2",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .hw = &sd_emmc_div.hw },
+			{ .fw_name = "xtal", },
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sd_emmc = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SD_EMMC_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sd_emmc_sel2.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap psram_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PSRAM_CLK_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "psram_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = sd_emmc_psram_dmc_parents,
+		.num_parents = ARRAY_SIZE(sd_emmc_psram_dmc_parents),
+	},
+};
+
+static struct clk_regmap psram_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PSRAM_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "psram_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&psram_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap psram_sel2 = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PSRAM_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "psram_sel2",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .hw = &psram_div.hw },
+			{ .fw_name = "xtal", },
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap psram = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PSRAM_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "psram",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&psram_sel2.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dmc_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DMC_CLK_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dmc_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = sd_emmc_psram_dmc_parents,
+		.num_parents = ARRAY_SIZE(sd_emmc_psram_dmc_parents),
+	},
+};
+
+static struct clk_regmap dmc_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = DMC_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dmc_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dmc_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dmc_sel2 = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DMC_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dmc_sel2",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .hw = &dmc_div.hw },
+			{ .fw_name = "xtal", },
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dmc = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DMC_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dmc",
+		.ops = &clk_regmap_gate_ro_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dmc_sel2.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap ceca_32k_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CECA_CLK_CTRL0,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "ceca_32k_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap ceca_32k_div = {
+	.data = &(struct meson_clk_dualdiv_data){
+		.n1 = {
+			.reg_off = CECA_CLK_CTRL0,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.n2 = {
+			.reg_off = CECA_CLK_CTRL0,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.m1 = {
+			.reg_off = CECA_CLK_CTRL1,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.m2 = {
+			.reg_off = CECA_CLK_CTRL1,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.dual = {
+			.reg_off = CECA_CLK_CTRL0,
+			.shift   = 28,
+			.width   = 1,
+		},
+		.table = clk_32k_div_table,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ceca_32k_div",
+		.ops = &meson_clk_dualdiv_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&ceca_32k_in.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap ceca_32k_sel_pre = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = CECA_CLK_CTRL1,
+		.mask = 0x1,
+		.shift = 24,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ceca_32k_sel_pre",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&ceca_32k_div.hw,
+			&ceca_32k_in.hw,
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap ceca_32k_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = CECA_CLK_CTRL1,
+		.mask = 0x1,
+		.shift = 31,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ceca_32k_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&ceca_32k_sel_pre.hw,
+			&rtc.hw,
+		},
+		.num_parents = 2,
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap ceca_32k_out = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CECA_CLK_CTRL0,
+		.bit_idx = 30,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ceca_32k_out",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&ceca_32k_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap cecb_32k_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CECB_CLK_CTRL0,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "cecb_32k_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap cecb_32k_div = {
+	.data = &(struct meson_clk_dualdiv_data){
+		.n1 = {
+			.reg_off = CECB_CLK_CTRL0,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.n2 = {
+			.reg_off = CECB_CLK_CTRL0,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.m1 = {
+			.reg_off = CECB_CLK_CTRL1,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.m2 = {
+			.reg_off = CECB_CLK_CTRL1,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.dual = {
+			.reg_off = CECB_CLK_CTRL0,
+			.shift   = 28,
+			.width   = 1,
+		},
+		.table = clk_32k_div_table,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "cecb_32k_div",
+		.ops = &meson_clk_dualdiv_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&cecb_32k_in.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap cecb_32k_sel_pre = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = CECB_CLK_CTRL1,
+		.mask = 0x1,
+		.shift = 24,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "cecb_32k_sel_pre",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&cecb_32k_div.hw,
+			&cecb_32k_in.hw,
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap cecb_32k_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = CECB_CLK_CTRL1,
+		.mask = 0x1,
+		.shift = 31,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "cecb_32k_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&cecb_32k_sel_pre.hw,
+			&rtc.hw,
+		},
+		.num_parents = 2,
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap cecb_32k_out = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CECB_CLK_CTRL0,
+		.bit_idx = 30,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "cecb_32k_out",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&cecb_32k_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+#define MESON_GATE(_name, _reg, _bit) \
+	MESON_PCLK(_name, _reg, _bit, &sys.hw)
+
+static MESON_GATE(clktree,	SYS_CLK_EN0,	0);
+static MESON_GATE(reset_ctrl,	SYS_CLK_EN0,	1);
+static MESON_GATE(analog_ctrl,	SYS_CLK_EN0,	2);
+static MESON_GATE(pwr_ctrl,	SYS_CLK_EN0,	3);
+static MESON_GATE(pad_ctrl,	SYS_CLK_EN0,	4);
+static MESON_GATE(sys_ctrl,	SYS_CLK_EN0,	5);
+static MESON_GATE(temp_sensor,	SYS_CLK_EN0,	6);
+static MESON_GATE(am2axi_dev,	SYS_CLK_EN0,	7);
+static MESON_GATE(spicc_b,	SYS_CLK_EN0,	8);
+static MESON_GATE(spicc_a,	SYS_CLK_EN0,	9);
+static MESON_GATE(msr,		SYS_CLK_EN0,	10);
+static MESON_GATE(audio,	SYS_CLK_EN0,	11);
+static MESON_GATE(jtag_ctrl,	SYS_CLK_EN0,	12);
+static MESON_GATE(saradc_en,	SYS_CLK_EN0,	13);
+static MESON_GATE(pwm_ef,	SYS_CLK_EN0,	14);
+static MESON_GATE(pwm_cd,	SYS_CLK_EN0,	15);
+static MESON_GATE(pwm_ab,	SYS_CLK_EN0,	16);
+static MESON_GATE(cec,		SYS_CLK_EN0,	17);
+static MESON_GATE(i2c_s,	SYS_CLK_EN0,	18);
+static MESON_GATE(ir_ctrl,	SYS_CLK_EN0,	19);
+static MESON_GATE(i2c_m_d,	SYS_CLK_EN0,	20);
+static MESON_GATE(i2c_m_c,	SYS_CLK_EN0,	21);
+static MESON_GATE(i2c_m_b,	SYS_CLK_EN0,	22);
+static MESON_GATE(i2c_m_a,	SYS_CLK_EN0,	23);
+static MESON_GATE(acodec,	SYS_CLK_EN0,	24);
+static MESON_GATE(otp,		SYS_CLK_EN0,	25);
+static MESON_GATE(sd_emmc_a,	SYS_CLK_EN0,	26);
+static MESON_GATE(usb_phy,	SYS_CLK_EN0,	27);
+static MESON_GATE(usb_ctrl,	SYS_CLK_EN0,	28);
+static MESON_GATE(sys_dspb,	SYS_CLK_EN0,	29);
+static MESON_GATE(sys_dspa,	SYS_CLK_EN0,	30);
+static MESON_GATE(dma,		SYS_CLK_EN0,	31);
+static MESON_GATE(irq_ctrl,	SYS_CLK_EN1,	0);
+static MESON_GATE(nic,		SYS_CLK_EN1,	1);
+static MESON_GATE(gic,		SYS_CLK_EN1,	2);
+static MESON_GATE(uart_c,	SYS_CLK_EN1,	3);
+static MESON_GATE(uart_b,	SYS_CLK_EN1,	4);
+static MESON_GATE(uart_a,	SYS_CLK_EN1,	5);
+static MESON_GATE(sys_psram,	SYS_CLK_EN1,	6);
+static MESON_GATE(rsa,		SYS_CLK_EN1,	8);
+static MESON_GATE(coresight,	SYS_CLK_EN1,	9);
+static MESON_GATE(am2axi_vad,	AXI_CLK_EN,	0);
+static MESON_GATE(audio_vad,	AXI_CLK_EN,	1);
+static MESON_GATE(axi_dmc,	AXI_CLK_EN,	3);
+static MESON_GATE(axi_psram,	AXI_CLK_EN,	4);
+static MESON_GATE(ramb,		AXI_CLK_EN,	5);
+static MESON_GATE(rama,		AXI_CLK_EN,	6);
+static MESON_GATE(axi_spifc,	AXI_CLK_EN,	7);
+static MESON_GATE(axi_nic,	AXI_CLK_EN,	8);
+static MESON_GATE(axi_dma,	AXI_CLK_EN,	9);
+static MESON_GATE(cpu_ctrl,	AXI_CLK_EN,	10);
+static MESON_GATE(rom,		AXI_CLK_EN,	11);
+static MESON_GATE(prod_i2c,	AXI_CLK_EN,	12);
+
+/* Array of all clocks registered by this provider */
+static struct clk_hw_onecell_data a1_periphs_clks = {
+	.hws = {
+		[CLKID_XTAL_IN]			= &xtal_in.hw,
+		[CLKID_FIXPLL_IN]		= &fixpll_in.hw,
+		[CLKID_USB_PHY_IN]		= &usb_phy_in.hw,
+		[CLKID_USB_CTRL_IN]		= &usb_ctrl_in.hw,
+		[CLKID_HIFIPLL_IN]		= &hifipll_in.hw,
+		[CLKID_SYSPLL_IN]		= &syspll_in.hw,
+		[CLKID_DDS_IN]			= &dds_in.hw,
+		[CLKID_SYS]			= &sys.hw,
+		[CLKID_CLKTREE]			= &clktree.hw,
+		[CLKID_RESET_CTRL]		= &reset_ctrl.hw,
+		[CLKID_ANALOG_CTRL]		= &analog_ctrl.hw,
+		[CLKID_PWR_CTRL]		= &pwr_ctrl.hw,
+		[CLKID_PAD_CTRL]		= &pad_ctrl.hw,
+		[CLKID_SYS_CTRL]		= &sys_ctrl.hw,
+		[CLKID_TEMP_SENSOR]		= &temp_sensor.hw,
+		[CLKID_AM2AXI_DIV]		= &am2axi_dev.hw,
+		[CLKID_SPICC_B]			= &spicc_b.hw,
+		[CLKID_SPICC_A]			= &spicc_a.hw,
+		[CLKID_MSR]			= &msr.hw,
+		[CLKID_AUDIO]			= &audio.hw,
+		[CLKID_JTAG_CTRL]		= &jtag_ctrl.hw,
+		[CLKID_SARADC_EN]		= &saradc_en.hw,
+		[CLKID_PWM_EF]			= &pwm_ef.hw,
+		[CLKID_PWM_CD]			= &pwm_cd.hw,
+		[CLKID_PWM_AB]			= &pwm_ab.hw,
+		[CLKID_CEC]			= &cec.hw,
+		[CLKID_I2C_S]			= &i2c_s.hw,
+		[CLKID_IR_CTRL]			= &ir_ctrl.hw,
+		[CLKID_I2C_M_D]			= &i2c_m_d.hw,
+		[CLKID_I2C_M_C]			= &i2c_m_c.hw,
+		[CLKID_I2C_M_B]			= &i2c_m_b.hw,
+		[CLKID_I2C_M_A]			= &i2c_m_a.hw,
+		[CLKID_ACODEC]			= &acodec.hw,
+		[CLKID_OTP]			= &otp.hw,
+		[CLKID_SD_EMMC_A]		= &sd_emmc_a.hw,
+		[CLKID_USB_PHY]			= &usb_phy.hw,
+		[CLKID_USB_CTRL]		= &usb_ctrl.hw,
+		[CLKID_SYS_DSPB]		= &sys_dspb.hw,
+		[CLKID_SYS_DSPA]		= &sys_dspa.hw,
+		[CLKID_DMA]			= &dma.hw,
+		[CLKID_IRQ_CTRL]		= &irq_ctrl.hw,
+		[CLKID_NIC]			= &nic.hw,
+		[CLKID_GIC]			= &gic.hw,
+		[CLKID_UART_C]			= &uart_c.hw,
+		[CLKID_UART_B]			= &uart_b.hw,
+		[CLKID_UART_A]			= &uart_a.hw,
+		[CLKID_SYS_PSRAM]		= &sys_psram.hw,
+		[CLKID_RSA]			= &rsa.hw,
+		[CLKID_CORESIGHT]		= &coresight.hw,
+		[CLKID_AM2AXI_VAD]		= &am2axi_vad.hw,
+		[CLKID_AUDIO_VAD]		= &audio_vad.hw,
+		[CLKID_AXI_DMC]			= &axi_dmc.hw,
+		[CLKID_AXI_PSRAM]		= &axi_psram.hw,
+		[CLKID_RAMB]			= &ramb.hw,
+		[CLKID_RAMA]			= &rama.hw,
+		[CLKID_AXI_SPIFC]		= &axi_spifc.hw,
+		[CLKID_AXI_NIC]			= &axi_nic.hw,
+		[CLKID_AXI_DMA]			= &axi_dma.hw,
+		[CLKID_CPU_CTRL]		= &cpu_ctrl.hw,
+		[CLKID_ROM]			= &rom.hw,
+		[CLKID_PROC_I2C]		= &prod_i2c.hw,
+		[CLKID_DSPA_SEL]		= &dspa_sel.hw,
+		[CLKID_DSPB_SEL]		= &dspb_sel.hw,
+		[CLKID_DSPA_EN]			= &dspa_en.hw,
+		[CLKID_DSPA_EN_NIC]		= &dspa_en_nic.hw,
+		[CLKID_DSPB_EN]			= &dspb_en.hw,
+		[CLKID_DSPB_EN_NIC]		= &dspb_en_nic.hw,
+		[CLKID_RTC]			= &rtc.hw,
+		[CLKID_CECA_32K]		= &ceca_32k_out.hw,
+		[CLKID_CECB_32K]		= &cecb_32k_out.hw,
+		[CLKID_24M]			= &clk_24m.hw,
+		[CLKID_12M]			= &clk_12m.hw,
+		[CLKID_FCLK_DIV2_DIVN]		= &fclk_div2_divn.hw,
+		[CLKID_GEN]			= &gen.hw,
+		[CLKID_SARADC_SEL]		= &saradc_sel.hw,
+		[CLKID_SARADC]			= &saradc.hw,
+		[CLKID_PWM_A]			= &pwm_a.hw,
+		[CLKID_PWM_B]			= &pwm_b.hw,
+		[CLKID_PWM_C]			= &pwm_c.hw,
+		[CLKID_PWM_D]			= &pwm_d.hw,
+		[CLKID_PWM_E]			= &pwm_e.hw,
+		[CLKID_PWM_F]			= &pwm_f.hw,
+		[CLKID_SPICC]			= &spicc.hw,
+		[CLKID_TS]			= &ts.hw,
+		[CLKID_SPIFC]			= &spifc.hw,
+		[CLKID_USB_BUS]			= &usb_bus.hw,
+		[CLKID_SD_EMMC]			= &sd_emmc.hw,
+		[CLKID_PSRAM]			= &psram.hw,
+		[CLKID_DMC]			= &dmc.hw,
+		[CLKID_SYS_A_SEL]		= &sys_a_sel.hw,
+		[CLKID_SYS_A_DIV]		= &sys_a_div.hw,
+		[CLKID_SYS_A]			= &sys_a.hw,
+		[CLKID_SYS_B_SEL]		= &sys_b_sel.hw,
+		[CLKID_SYS_B_DIV]		= &sys_b_div.hw,
+		[CLKID_SYS_B]			= &sys_b.hw,
+		[CLKID_DSPA_A_SEL]		= &dspa_a_sel.hw,
+		[CLKID_DSPA_A_DIV]		= &dspa_a_div.hw,
+		[CLKID_DSPA_A]			= &dspa_a.hw,
+		[CLKID_DSPA_B_SEL]		= &dspa_b_sel.hw,
+		[CLKID_DSPA_B_DIV]		= &dspa_b_div.hw,
+		[CLKID_DSPA_B]			= &dspa_b.hw,
+		[CLKID_DSPB_A_SEL]		= &dspb_a_sel.hw,
+		[CLKID_DSPB_A_DIV]		= &dspb_a_div.hw,
+		[CLKID_DSPB_A]			= &dspb_a.hw,
+		[CLKID_DSPB_B_SEL]		= &dspb_b_sel.hw,
+		[CLKID_DSPB_B_DIV]		= &dspb_b_div.hw,
+		[CLKID_DSPB_B]			= &dspb_b.hw,
+		[CLKID_RTC_32K_IN]		= &rtc_32k_in.hw,
+		[CLKID_RTC_32K_DIV]		= &rtc_32k_div.hw,
+		[CLKID_RTC_32K_XTAL]		= &rtc_32k_xtal.hw,
+		[CLKID_RTC_32K_SEL]		= &rtc_32k_sel.hw,
+		[CLKID_CECB_32K_IN]		= &cecb_32k_in.hw,
+		[CLKID_CECB_32K_DIV]		= &cecb_32k_div.hw,
+		[CLKID_CECB_32K_SEL_PRE]	= &cecb_32k_sel_pre.hw,
+		[CLKID_CECB_32K_SEL]		= &cecb_32k_sel.hw,
+		[CLKID_CECA_32K_IN]		= &ceca_32k_in.hw,
+		[CLKID_CECA_32K_DIV]		= &ceca_32k_div.hw,
+		[CLKID_CECA_32K_SEL_PRE]	= &ceca_32k_sel_pre.hw,
+		[CLKID_CECA_32K_SEL]		= &ceca_32k_sel.hw,
+		[CLKID_DIV2_PRE]		= &fclk_div2_divn_pre.hw,
+		[CLKID_24M_DIV2]		= &clk_24m_div2.hw,
+		[CLKID_GEN_SEL]			= &gen_sel.hw,
+		[CLKID_GEN_DIV]			= &gen_div.hw,
+		[CLKID_SARADC_DIV]		= &saradc_div.hw,
+		[CLKID_PWM_A_SEL]		= &pwm_a_sel.hw,
+		[CLKID_PWM_A_DIV]		= &pwm_a_div.hw,
+		[CLKID_PWM_B_SEL]		= &pwm_b_sel.hw,
+		[CLKID_PWM_B_DIV]		= &pwm_b_div.hw,
+		[CLKID_PWM_C_SEL]		= &pwm_c_sel.hw,
+		[CLKID_PWM_C_DIV]		= &pwm_c_div.hw,
+		[CLKID_PWM_D_SEL]		= &pwm_d_sel.hw,
+		[CLKID_PWM_D_DIV]		= &pwm_d_div.hw,
+		[CLKID_PWM_E_SEL]		= &pwm_e_sel.hw,
+		[CLKID_PWM_E_DIV]		= &pwm_e_div.hw,
+		[CLKID_PWM_F_SEL]		= &pwm_f_sel.hw,
+		[CLKID_PWM_F_DIV]		= &pwm_f_div.hw,
+		[CLKID_SPICC_SEL]		= &spicc_sel.hw,
+		[CLKID_SPICC_DIV]		= &spicc_div.hw,
+		[CLKID_SPICC_SEL2]		= &spicc_sel2.hw,
+		[CLKID_TS_DIV]			= &ts_div.hw,
+		[CLKID_SPIFC_SEL]		= &spifc_sel.hw,
+		[CLKID_SPIFC_DIV]		= &spifc_div.hw,
+		[CLKID_SPIFC_SEL2]		= &spifc_sel2.hw,
+		[CLKID_USB_BUS_SEL]		= &usb_bus_sel.hw,
+		[CLKID_USB_BUS_DIV]		= &usb_bus_div.hw,
+		[CLKID_SD_EMMC_SEL]		= &sd_emmc_sel.hw,
+		[CLKID_SD_EMMC_DIV]		= &sd_emmc_div.hw,
+		[CLKID_SD_EMMC_SEL2]		= &sd_emmc_sel2.hw,
+		[CLKID_PSRAM_SEL]		= &psram_sel.hw,
+		[CLKID_PSRAM_DIV]		= &psram_div.hw,
+		[CLKID_PSRAM_SEL2]		= &psram_sel2.hw,
+		[CLKID_DMC_SEL]			= &dmc_sel.hw,
+		[CLKID_DMC_DIV]			= &dmc_div.hw,
+		[CLKID_DMC_SEL2]		= &dmc_sel2.hw,
+		[NR_CLKS]			= NULL,
+	},
+	.num = NR_CLKS,
+};
+
+/* Convenience table to populate regmap in .probe */
+static struct clk_regmap *const a1_periphs_regmaps[] = {
+	&xtal_in,
+	&fixpll_in,
+	&usb_phy_in,
+	&usb_ctrl_in,
+	&hifipll_in,
+	&syspll_in,
+	&dds_in,
+	&sys,
+	&clktree,
+	&reset_ctrl,
+	&analog_ctrl,
+	&pwr_ctrl,
+	&pad_ctrl,
+	&sys_ctrl,
+	&temp_sensor,
+	&am2axi_dev,
+	&spicc_b,
+	&spicc_a,
+	&msr,
+	&audio,
+	&jtag_ctrl,
+	&saradc_en,
+	&pwm_ef,
+	&pwm_cd,
+	&pwm_ab,
+	&cec,
+	&i2c_s,
+	&ir_ctrl,
+	&i2c_m_d,
+	&i2c_m_c,
+	&i2c_m_b,
+	&i2c_m_a,
+	&acodec,
+	&otp,
+	&sd_emmc_a,
+	&usb_phy,
+	&usb_ctrl,
+	&sys_dspb,
+	&sys_dspa,
+	&dma,
+	&irq_ctrl,
+	&nic,
+	&gic,
+	&uart_c,
+	&uart_b,
+	&uart_a,
+	&sys_psram,
+	&rsa,
+	&coresight,
+	&am2axi_vad,
+	&audio_vad,
+	&axi_dmc,
+	&axi_psram,
+	&ramb,
+	&rama,
+	&axi_spifc,
+	&axi_nic,
+	&axi_dma,
+	&cpu_ctrl,
+	&rom,
+	&prod_i2c,
+	&dspa_sel,
+	&dspb_sel,
+	&dspa_en,
+	&dspa_en_nic,
+	&dspb_en,
+	&dspb_en_nic,
+	&rtc,
+	&ceca_32k_out,
+	&cecb_32k_out,
+	&clk_24m,
+	&clk_12m,
+	&fclk_div2_divn,
+	&gen,
+	&saradc_sel,
+	&saradc,
+	&pwm_a,
+	&pwm_b,
+	&pwm_c,
+	&pwm_d,
+	&pwm_e,
+	&pwm_f,
+	&spicc,
+	&ts,
+	&spifc,
+	&usb_bus,
+	&sd_emmc,
+	&psram,
+	&dmc,
+	&sys_a_sel,
+	&sys_a_div,
+	&sys_a,
+	&sys_b_sel,
+	&sys_b_div,
+	&sys_b,
+	&dspa_a_sel,
+	&dspa_a_div,
+	&dspa_a,
+	&dspa_b_sel,
+	&dspa_b_div,
+	&dspa_b,
+	&dspb_a_sel,
+	&dspb_a_div,
+	&dspb_a,
+	&dspb_b_sel,
+	&dspb_b_div,
+	&dspb_b,
+	&rtc_32k_in,
+	&rtc_32k_div,
+	&rtc_32k_xtal,
+	&rtc_32k_sel,
+	&cecb_32k_in,
+	&cecb_32k_div,
+	&cecb_32k_sel_pre,
+	&cecb_32k_sel,
+	&ceca_32k_in,
+	&ceca_32k_div,
+	&ceca_32k_sel_pre,
+	&ceca_32k_sel,
+	&fclk_div2_divn_pre,
+	&gen_sel,
+	&gen_div,
+	&saradc_div,
+	&pwm_a_sel,
+	&pwm_a_div,
+	&pwm_b_sel,
+	&pwm_b_div,
+	&pwm_c_sel,
+	&pwm_c_div,
+	&pwm_d_sel,
+	&pwm_d_div,
+	&pwm_e_sel,
+	&pwm_e_div,
+	&pwm_f_sel,
+	&pwm_f_div,
+	&spicc_sel,
+	&spicc_div,
+	&spicc_sel2,
+	&ts_div,
+	&spifc_sel,
+	&spifc_div,
+	&spifc_sel2,
+	&usb_bus_sel,
+	&usb_bus_div,
+	&sd_emmc_sel,
+	&sd_emmc_div,
+	&sd_emmc_sel2,
+	&psram_sel,
+	&psram_div,
+	&psram_sel2,
+	&dmc_sel,
+	&dmc_div,
+	&dmc_sel2,
+};
+
+static struct regmap_config a1_periphs_regmap_cfg = {
+	.reg_bits   = 32,
+	.val_bits   = 32,
+	.reg_stride = 4,
+};
+
+static int meson_a1_periphs_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	void __iomem *base;
+	struct regmap *map;
+	int clkid, i, err;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return dev_err_probe(dev, PTR_ERR(base),
+				     "can't ioremap resource\n");
+
+	map = devm_regmap_init_mmio(dev, base, &a1_periphs_regmap_cfg);
+	if (IS_ERR(map))
+		return dev_err_probe(dev, PTR_ERR(map),
+				     "can't init regmap mmio region\n");
+
+	/* Populate regmap for the regmap backed clocks */
+	for (i = 0; i < ARRAY_SIZE(a1_periphs_regmaps); i++)
+		a1_periphs_regmaps[i]->map = map;
+
+	for (clkid = 0; clkid < a1_periphs_clks.num; clkid++) {
+		err = devm_clk_hw_register(dev, a1_periphs_clks.hws[clkid]);
+		if (err)
+			return dev_err_probe(dev, err,
+					     "clock[%d] registration failed\n",
+					     clkid);
+	}
+
+	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+					   &a1_periphs_clks);
+}
+
+static const struct of_device_id a1_periphs_clkc_match_table[] = {
+	{ .compatible = "amlogic,a1-clkc", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, a1_periphs_clkc_match_table);
+
+static struct platform_driver a1_periphs_clkc_driver = {
+	.probe = meson_a1_periphs_probe,
+	.driver = {
+		.name = "a1-clkc",
+		.of_match_table = a1_periphs_clkc_match_table,
+	},
+};
+
+module_platform_driver(a1_periphs_clkc_driver);
+MODULE_AUTHOR("Jian Hu <jian.hu@xxxxxxxxxxx>");
+MODULE_AUTHOR("Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxx>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/meson/a1.h b/drivers/clk/meson/a1.h
new file mode 100644
index 000000000000..359b46b73035
--- /dev/null
+++ b/drivers/clk/meson/a1.h
@@ -0,0 +1,114 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Amlogic A1 Peripheral Clock Controller internals
+ *
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ * Author: Jian Hu <jian.hu@xxxxxxxxxxx>
+ *
+ * Copyright (c) 2023, SberDevices. All Rights Reserved.
+ * Author: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxx>
+ */
+
+#ifndef __A1_H
+#define __A1_H
+
+/* peripheral clock controller register offset */
+#define SYS_OSCIN_CTRL		0x0
+#define RTC_BY_OSCIN_CTRL0	0x4
+#define RTC_BY_OSCIN_CTRL1	0x8
+#define RTC_CTRL		0xc
+#define SYS_CLK_CTRL0		0x10
+#define SYS_CLK_EN0		0x1c
+#define SYS_CLK_EN1		0x20
+#define AXI_CLK_EN		0x24
+#define DSPA_CLK_EN		0x28
+#define DSPB_CLK_EN		0x2c
+#define DSPA_CLK_CTRL0		0x30
+#define DSPB_CLK_CTRL0		0x34
+#define CLK12_24_CTRL		0x38
+#define GEN_CLK_CTRL		0x3c
+#define SAR_ADC_CLK_CTRL	0xc0
+#define PWM_CLK_AB_CTRL		0xc4
+#define PWM_CLK_CD_CTRL		0xc8
+#define PWM_CLK_EF_CTRL		0xcc
+#define SPICC_CLK_CTRL		0xd0
+#define TS_CLK_CTRL		0xd4
+#define SPIFC_CLK_CTRL		0xd8
+#define USB_BUSCLK_CTRL		0xdc
+#define SD_EMMC_CLK_CTRL	0xe0
+#define CECA_CLK_CTRL0		0xe4
+#define CECA_CLK_CTRL1		0xe8
+#define CECB_CLK_CTRL0		0xec
+#define CECB_CLK_CTRL1		0xf0
+#define PSRAM_CLK_CTRL		0xf4
+#define DMC_CLK_CTRL		0xf8
+
+/* include the CLKIDs that have been made part of the DT binding */
+#include <dt-bindings/clock/amlogic,a1-clkc.h>
+
+/*
+ * CLKID index values for internal clocks
+ *
+ * These indices are entirely contrived and do not map onto the hardware.
+ * It has now been decided to expose everything by default in the DT header:
+ * include/dt-bindings/clock/a1-clkc.h. Only the clocks ids we don't want
+ * to expose, such as the internal muxes and dividers of composite clocks,
+ * will remain defined here.
+ */
+#define CLKID_XTAL_IN		0
+#define CLKID_DSPA_SEL		61
+#define CLKID_DSPB_SEL		62
+#define CLKID_SARADC_SEL	74
+#define CLKID_SYS_A_SEL		89
+#define CLKID_SYS_A_DIV		90
+#define CLKID_SYS_A		91
+#define CLKID_SYS_B_SEL		92
+#define CLKID_SYS_B_DIV		93
+#define CLKID_SYS_B		94
+#define CLKID_DSPA_A_DIV	96
+#define CLKID_DSPA_A		97
+#define CLKID_DSPA_B_DIV	99
+#define CLKID_DSPA_B		100
+#define CLKID_DSPB_A_DIV	102
+#define CLKID_DSPB_A		103
+#define CLKID_DSPB_B_DIV	105
+#define CLKID_DSPB_B		106
+#define CLKID_RTC_32K_IN	107
+#define CLKID_RTC_32K_DIV	108
+#define CLKID_RTC_32K_XTAL	109
+#define CLKID_RTC_32K_SEL	110
+#define CLKID_CECB_32K_IN	111
+#define CLKID_CECB_32K_DIV	112
+#define CLKID_CECA_32K_IN	115
+#define CLKID_CECA_32K_DIV	116
+#define CLKID_DIV2_PRE		119
+#define CLKID_24M_DIV2		120
+#define CLKID_GEN_DIV		122
+#define CLKID_SARADC_DIV	123
+#define CLKID_PWM_A_DIV		125
+#define CLKID_PWM_B_DIV		127
+#define CLKID_PWM_C_DIV		129
+#define CLKID_PWM_D_DIV		131
+#define CLKID_PWM_E_DIV		133
+#define CLKID_PWM_F_DIV		135
+#define CLKID_SPICC_SEL		136
+#define CLKID_SPICC_DIV		137
+#define CLKID_SPICC_SEL2	138
+#define CLKID_TS_DIV		139
+#define CLKID_SPIFC_SEL		140
+#define CLKID_SPIFC_DIV		141
+#define CLKID_SPIFC_SEL2	142
+#define CLKID_USB_BUS_SEL	143
+#define CLKID_USB_BUS_DIV	144
+#define CLKID_SD_EMMC_SEL	145
+#define CLKID_SD_EMMC_DIV	146
+#define CLKID_SD_EMMC_SEL2	147
+#define CLKID_PSRAM_SEL		148
+#define CLKID_PSRAM_DIV		149
+#define CLKID_PSRAM_SEL2	150
+#define CLKID_DMC_SEL		151
+#define CLKID_DMC_DIV		152
+#define CLKID_DMC_SEL2		153
+#define NR_CLKS			154
+
+#endif /* __A1_H */
-- 
2.36.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux