Re: [PATCH net-next 1/6] dt-bindings: net: Brcm ASP 2.0 Ethernet controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 19/04/2023 02:10, Justin Chen wrote:
> From: Florian Fainelli <f.fainelli@xxxxxxxxx>
> 
> Add a binding document for the Broadcom ASP 2.0 Ethernet
> controller.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
> Signed-off-by: Justin Chen <justinpopo6@xxxxxxxxx>
> ---
>  .../devicetree/bindings/net/brcm,asp-v2.0.yaml     | 146 +++++++++++++++++++++
>  1 file changed, 146 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml b/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml
> new file mode 100644
> index 000000000000..3817d722244f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml
> @@ -0,0 +1,146 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/net/brcm,asp-v2.0.yaml#";
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";

Drop quotes.

> +
> +title: Broadcom ASP 2.0 Ethernet controller
> +
> +maintainers:
> +  - Justin Chen <justinpopo6@xxxxxxxxx>
> +  - Florian Fainelli <f.fainelli@xxxxxxxxx>
> +
> +description: Broadcom Ethernet controller first introduced with 72165
> +
> +properties:
> +  '#address-cells':
> +    const: 1
> +  '#size-cells':
> +    const: 1
> +
> +  compatible:
> +    enum:
> +      - brcm,bcm72165-asp-v2.0
> +      - brcm,asp-v2.0
> +      - brcm,asp-v2.1

Is this part of SoC? If so, then SoC compatibles are preferred, not IP
block versions.

> +
> +  reg:
> +    maxItems: 1
> +    description: ASP registers

Drop description.

> +
> +  ranges: true
> +
> +  interrupts:
> +    minItems: 1
> +    items:
> +      - description: RX/TX interrupt
> +      - description: Port 0 Wake-on-LAN
> +      - description: Port 1 Wake-on-LAN
> +
> +  clocks:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array

Drop.

> +    description: Phandle to clock controller

Drop.

Instead maxItems.

> +
> +  clock-names:
> +    const: sw_asp

Drop entire property.

> +
> +  ethernet-ports:
> +    type: object
> +    properties:
> +      '#address-cells':
> +        const: 1
> +      '#size-cells':
> +        const: 0

Missing additionalProperties:false. Look at existing bindings how it is
done.

> +
> +    patternProperties:
> +      "^port@[0-9]+$":
> +        type: object
> +
> +        $ref: ethernet-controller.yaml#
> +
> +        properties:
> +          reg:
> +            maxItems: 1
> +            description: Port number
> +
> +          channel:
> +            maxItems: 1
> +            description: ASP channel number
> +
> +        required:
> +          - reg
> +          - channel
> +
> +patternProperties:
> +  "^mdio@[0-9a-f]+$":
> +    type: object
> +    $ref: "brcm,unimac-mdio.yaml"
> +
> +    description:
> +      ASP internal UniMAC MDIO bus
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - ranges
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    asp@9c00000 {

Node names should be generic.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

> +        compatible = "brcm,asp-v2.0";
> +        reg = <0x9c00000 0x1fff14>;
> +        interrupts = <0x0 0x33 0x4>;

Use proper defines for flags.

> +        ranges;
> +        clocks = <&scmi 14>;
> +        clock-names = "sw_asp";
> +        #address-cells = <1>;
> +        #size-cells = <1>;


Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux