Re: [PATCH net-next 1/6] dt-bindings: net: Brcm ASP 2.0 Ethernet controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Apr 21, 2023 at 12:29 AM Krzysztof Kozlowski
<krzysztof.kozlowski@xxxxxxxxxx> wrote:
>
> On 19/04/2023 02:10, Justin Chen wrote:
> > From: Florian Fainelli <f.fainelli@xxxxxxxxx>
> >
> > Add a binding document for the Broadcom ASP 2.0 Ethernet
> > controller.
> >
> > Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
> > Signed-off-by: Justin Chen <justinpopo6@xxxxxxxxx>
> > ---
> >  .../devicetree/bindings/net/brcm,asp-v2.0.yaml     | 146 +++++++++++++++++++++
> >  1 file changed, 146 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml b/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml
> > new file mode 100644
> > index 000000000000..3817d722244f
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml
> > @@ -0,0 +1,146 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: "http://devicetree.org/schemas/net/brcm,asp-v2.0.yaml#";
> > +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
>
> Drop quotes.
>
> > +
> > +title: Broadcom ASP 2.0 Ethernet controller
> > +
> > +maintainers:
> > +  - Justin Chen <justinpopo6@xxxxxxxxx>
> > +  - Florian Fainelli <f.fainelli@xxxxxxxxx>
> > +
> > +description: Broadcom Ethernet controller first introduced with 72165
> > +
> > +properties:
> > +  '#address-cells':
> > +    const: 1
> > +  '#size-cells':
> > +    const: 1
> > +
> > +  compatible:
> > +    enum:
> > +      - brcm,bcm72165-asp-v2.0
> > +      - brcm,asp-v2.0
> > +      - brcm,asp-v2.1
>
> Is this part of SoC? If so, then SoC compatibles are preferred, not IP
> block versions.
We have the same IP on different chips. So no, it isn't tied to a specific SoC.

>
> > +
> > +  reg:
> > +    maxItems: 1
> > +    description: ASP registers
>
> Drop description.
>
> > +
> > +  ranges: true
> > +
> > +  interrupts:
> > +    minItems: 1
> > +    items:
> > +      - description: RX/TX interrupt
> > +      - description: Port 0 Wake-on-LAN
> > +      - description: Port 1 Wake-on-LAN
> > +
> > +  clocks:
> > +    $ref: /schemas/types.yaml#/definitions/phandle-array
>
> Drop.
>
> > +    description: Phandle to clock controller
>
> Drop.
>
> Instead maxItems.
>
> > +
> > +  clock-names:
> > +    const: sw_asp
>
> Drop entire property.
>
> > +
> > +  ethernet-ports:
> > +    type: object
> > +    properties:
> > +      '#address-cells':
> > +        const: 1
> > +      '#size-cells':
> > +        const: 0
>
> Missing additionalProperties:false. Look at existing bindings how it is
> done.
>
> > +
> > +    patternProperties:
> > +      "^port@[0-9]+$":
> > +        type: object
> > +
> > +        $ref: ethernet-controller.yaml#
> > +
> > +        properties:
> > +          reg:
> > +            maxItems: 1
> > +            description: Port number
> > +
> > +          channel:
> > +            maxItems: 1
> > +            description: ASP channel number
> > +
> > +        required:
> > +          - reg
> > +          - channel
> > +
> > +patternProperties:
> > +  "^mdio@[0-9a-f]+$":
> > +    type: object
> > +    $ref: "brcm,unimac-mdio.yaml"
> > +
> > +    description:
> > +      ASP internal UniMAC MDIO bus
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - clocks
> > +  - clock-names
> > +  - ranges
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    asp@9c00000 {
>
> Node names should be generic.
> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
>
> > +        compatible = "brcm,asp-v2.0";
> > +        reg = <0x9c00000 0x1fff14>;
> > +        interrupts = <0x0 0x33 0x4>;
>
> Use proper defines for flags.
Not understanding this comment. Can you elaborate?

Thanks,
Justin
>
> > +        ranges;
> > +        clocks = <&scmi 14>;
> > +        clock-names = "sw_asp";
> > +        #address-cells = <1>;
> > +        #size-cells = <1>;
>
>
> Best regards,
> Krzysztof
>




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux