On Thu, Apr 13, 2023 at 12:29:04AM +0000, Ivan Mikhaylov wrote: > Add s32 mac-address-increment option for Get MAC Address command from > NC-SI. > > Signed-off-by: Paul Fertser <fercerpav@xxxxxxxxx> > Signed-off-by: Ivan Mikhaylov <fr0st61te@xxxxxxxxx> > --- > Documentation/devicetree/bindings/net/ftgmac100.txt | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/Documentation/devicetree/bindings/net/ftgmac100.txt b/Documentation/devicetree/bindings/net/ftgmac100.txt > index 29234021f601..7ef5329d888d 100644 > --- a/Documentation/devicetree/bindings/net/ftgmac100.txt > +++ b/Documentation/devicetree/bindings/net/ftgmac100.txt > @@ -22,6 +22,10 @@ Optional properties: > - use-ncsi: Use the NC-SI stack instead of an MDIO PHY. Currently assumes > rmii (100bT) but kept as a separate property in case NC-SI grows support > for a gigabit link. > +- mac-address-increment: Increment the MAC address taken by GMA command via > + NC-SI. Specifies a signed number to be added to the host MAC address as > + obtained by the OEM GMA command. If not specified, 1 is used by default > + for Broadcom and Intel network cards, 0 otherwise. This would need to be common. There's been some attempts around how to support a base MAC address with a transform per instance. So far it's not clear that something in DT works for everyone. Until there's something common (if ever), you need platform specific code somewhere to handle this. The nvmem binding has had some extensions to support that. Rob
