Add s32 mac-address-increment option for Get MAC Address command from NC-SI. Signed-off-by: Paul Fertser <fercerpav@xxxxxxxxx> Signed-off-by: Ivan Mikhaylov <fr0st61te@xxxxxxxxx> --- Documentation/devicetree/bindings/net/ftgmac100.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/net/ftgmac100.txt b/Documentation/devicetree/bindings/net/ftgmac100.txt index 29234021f601..7ef5329d888d 100644 --- a/Documentation/devicetree/bindings/net/ftgmac100.txt +++ b/Documentation/devicetree/bindings/net/ftgmac100.txt @@ -22,6 +22,10 @@ Optional properties: - use-ncsi: Use the NC-SI stack instead of an MDIO PHY. Currently assumes rmii (100bT) but kept as a separate property in case NC-SI grows support for a gigabit link. +- mac-address-increment: Increment the MAC address taken by GMA command via + NC-SI. Specifies a signed number to be added to the host MAC address as + obtained by the OEM GMA command. If not specified, 1 is used by default + for Broadcom and Intel network cards, 0 otherwise. - no-hw-checksum: Used to disable HW checksum support. Here for backward compatibility as the driver now should have correct defaults based on the SoC. -- 2.40.0
