On 17/04/2023 08:13, Sricharan Ramabadhran wrote:
>>> + tlmm: pinctrl@1000000 {
>>> + compatible = "qcom,ipq5018-tlmm";
>>> + reg = <0x01000000 0x300000>;
>>> + gpio-controller;
>>> + #gpio-cells = <2>;
>>> + gpio-ranges = <&tlmm 0 0 47>;
>>> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
>>> + interrupt-controller;
>>> + #interrupt-cells = <2>;
>>> +
>>> + uart2-state {
>>> + pins = "gpio34", "gpio35";
>>> + function = "blsp2_uart";
>>
>> Does not look like you tested the bindings. Please run `make
>> dt_binding_check` (see
>> Documentation/devicetree/bindings/writing-schema.rst for instructions).
>
> I ran it against the TOT, will run it this time on nxt and post V4.
I don't know what is TOT, but this would fail in every case on every tree.
Best regards,
Krzysztof
