Re: [PATCH v1 1/3] dt-binding: pci: add JH7110 PCIe dt-binding documents.

[Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>]

On 06/04/2023 13:11, Minda Chen wrote:
> Add PCIe controller driver dt-binding documents
> for StarFive JH7110 SoC platform.

Use subject prefixes matching the subsystem (which you can get for
example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
your patch is touching). Missing: 's'

Subject: drop second/last, redundant "dt-binding documents". The
"dt-bindings" prefix is already stating that these are bindings and
documentation.

Drop also full stop.

> 
> Signed-off-by: Minda Chen <minda.chen@xxxxxxxxxxxxxxxx>
> ---
>  .../bindings/pci/starfive,jh7110-pcie.yaml    | 163 ++++++++++++++++++
>  1 file changed, 163 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
> new file mode 100644
> index 000000000000..fa4829766195
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
> @@ -0,0 +1,163 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/starfive,jh7110-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: StarFive JH7110 PCIe 2.0 host controller
> +
> +maintainers:
> +  - Minda Chen <minda.chen@xxxxxxxxxxxxxxxx>
> +
> +allOf:
> +  - $ref: /schemas/pci/pci-bus.yaml#
> +  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
> +
> +properties:
> +  compatible:
> +    const: starfive,jh7110-pcie
> +
> +  reg:
> +    maxItems: 2
> +
> +  reg-names:
> +    items:
> +      - const: reg
> +      - const: config
> +
> +  msi-parent: true
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 4
> +
> +  clock-names:
> +    items:
> +      - const: noc
> +      - const: tl
> +      - const: axi_mst0
> +      - const: apb
> +
> +  resets:
> +    items:
> +      - description: AXI MST0 reset
> +      - description: AXI SLAVE reset
> +      - description: AXI SLAVE0 reset
> +      - description: PCIE BRIDGE reset
> +      - description: PCIE CORE reset
> +      - description: PCIE APB reset
> +
> +  reset-names:
> +    items:
> +      - const: mst0
> +      - const: slv0
> +      - const: slv
> +      - const: brg
> +      - const: core
> +      - const: apb
> +
> +  starfive,stg-syscon:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    items:
> +      items:
> +        - description: phandle to System Register Controller stg_syscon node.
> +        - description: register0 offset of STG_SYSCONSAIF__SYSCFG register for PCIe.
> +        - description: register1 offset of STG_SYSCONSAIF__SYSCFG register for PCIe.
> +        - description: register2 offset of STG_SYSCONSAIF__SYSCFG register for PCIe.
> +        - description: register3 offset of STG_SYSCONSAIF__SYSCFG register for PCIe.
> +    description:
> +      The phandle to System Register Controller syscon node and the offset
> +      of STG_SYSCONSAIF__SYSCFG register for PCIe. Total 4 regsisters offset
> +      for PCIe.
> +
> +  pwren-gpios:
> +    description: Should specify the GPIO for controlling the PCI bus device power on.

What are these? Different than defined in gpio-consumer-common?

> +    maxItems: 1
> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +  phys:
> +    maxItems: 1
> +
> +  interrupt-controller:
> +    type: object
> +    properties:
> +      '#address-cells':
> +        const: 0
> +
> +      '#interrupt-cells':
> +        const: 1
> +
> +      interrupt-controller: true
> +
> +    required:
> +      - '#address-cells'
> +      - '#interrupt-cells'
> +      - interrupt-controller
> +
> +    additionalProperties: false
> +
> +required:
> +  - reg
> +  - reg-names
> +  - "#interrupt-cells"

Keep consistent quotes - either ' or "

Are you sure this is correct? You have interrupt controller as child node.


> +  - interrupts
> +  - interrupt-map-mask
> +  - interrupt-map
> +  - clocks
> +  - clock-names
> +  - resets
> +  - msi-controller
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    bus {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        pcie0: pcie@2B000000 {

Lowercase hex. Everywhere.

> +            compatible = "starfive,jh7110-pcie";
> +            #address-cells = <3>;
> +            #size-cells = <2>;
> +            #interrupt-cells = <1>;
> +            reg = <0x0 0x2B000000 0x0 0x1000000>,
> +                  <0x9 0x40000000 0x0 0x10000000>;

reg (and reg-names and ranges) is always second property.

> +            reg-names = "reg", "config";
> +            device_type = "pci";
> +            starfive,stg-syscon = <&stg_syscon 0xc0 0xc4 0x130 0x1b8>;
> +            bus-range = <0x0 0xff>;
> +            ranges = <0x82000000  0x0 0x30000000  0x0 0x30000000 0x0 0x08000000>,
> +                     <0xc3000000  0x9 0x00000000  0x9 0x00000000 0x0 0x40000000>;
> +            interrupt-parent = <&plic>;
> +            interrupts = <56>;
> +            interrupt-map-mask = <0x0 0x0 0x0 0x7>;
> +            interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc0 0x1>,
> +                            <0x0 0x0 0x0 0x2 &pcie_intc0 0x2>,
> +                            <0x0 0x0 0x0 0x3 &pcie_intc0 0x3>,
> +                            <0x0 0x0 0x0 0x4 &pcie_intc0 0x4>;


Best regards,
Krzysztof