Add PCIe controller driver dt-binding documents for StarFive JH7110 SoC platform. Signed-off-by: Minda Chen <minda.chen@xxxxxxxxxxxxxxxx> --- .../bindings/pci/starfive,jh7110-pcie.yaml | 163 ++++++++++++++++++ 1 file changed, 163 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml diff --git a/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml new file mode 100644 index 000000000000..fa4829766195 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml @@ -0,0 +1,163 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/starfive,jh7110-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 PCIe 2.0 host controller + +maintainers: + - Minda Chen <minda.chen@xxxxxxxxxxxxxxxx> + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/interrupt-controller/msi-controller.yaml# + +properties: + compatible: + const: starfive,jh7110-pcie + + reg: + maxItems: 2 + + reg-names: + items: + - const: reg + - const: config + + msi-parent: true + + interrupts: + maxItems: 1 + + clocks: + maxItems: 4 + + clock-names: + items: + - const: noc + - const: tl + - const: axi_mst0 + - const: apb + + resets: + items: + - description: AXI MST0 reset + - description: AXI SLAVE reset + - description: AXI SLAVE0 reset + - description: PCIE BRIDGE reset + - description: PCIE CORE reset + - description: PCIE APB reset + + reset-names: + items: + - const: mst0 + - const: slv0 + - const: slv + - const: brg + - const: core + - const: apb + + starfive,stg-syscon: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle to System Register Controller stg_syscon node. + - description: register0 offset of STG_SYSCONSAIF__SYSCFG register for PCIe. + - description: register1 offset of STG_SYSCONSAIF__SYSCFG register for PCIe. + - description: register2 offset of STG_SYSCONSAIF__SYSCFG register for PCIe. + - description: register3 offset of STG_SYSCONSAIF__SYSCFG register for PCIe. + description: + The phandle to System Register Controller syscon node and the offset + of STG_SYSCONSAIF__SYSCFG register for PCIe. Total 4 regsisters offset + for PCIe. + + pwren-gpios: + description: Should specify the GPIO for controlling the PCI bus device power on. + maxItems: 1 + + reset-gpios: + maxItems: 1 + + phys: + maxItems: 1 + + interrupt-controller: + type: object + properties: + '#address-cells': + const: 0 + + '#interrupt-cells': + const: 1 + + interrupt-controller: true + + required: + - '#address-cells' + - '#interrupt-cells' + - interrupt-controller + + additionalProperties: false + +required: + - reg + - reg-names + - "#interrupt-cells" + - interrupts + - interrupt-map-mask + - interrupt-map + - clocks + - clock-names + - resets + - msi-controller + +unevaluatedProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + pcie0: pcie@2B000000 { + compatible = "starfive,jh7110-pcie"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + reg = <0x0 0x2B000000 0x0 0x1000000>, + <0x9 0x40000000 0x0 0x10000000>; + reg-names = "reg", "config"; + device_type = "pci"; + starfive,stg-syscon = <&stg_syscon 0xc0 0xc4 0x130 0x1b8>; + bus-range = <0x0 0xff>; + ranges = <0x82000000 0x0 0x30000000 0x0 0x30000000 0x0 0x08000000>, + <0xc3000000 0x9 0x00000000 0x9 0x00000000 0x0 0x40000000>; + interrupt-parent = <&plic>; + interrupts = <56>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc0 0x1>, + <0x0 0x0 0x0 0x2 &pcie_intc0 0x2>, + <0x0 0x0 0x0 0x3 &pcie_intc0 0x3>, + <0x0 0x0 0x0 0x4 &pcie_intc0 0x4>; + msi-parent = <&pcie0>; + msi-controller; + clocks = <&syscrg 86>, + <&stgcrg 10>, + <&stgcrg 8>, + <&stgcrg 9>; + clock-names = "noc", "tl", "axi_mst0", "apb"; + resets = <&stgcrg 11>, + <&stgcrg 12>, + <&stgcrg 13>, + <&stgcrg 14>, + <&stgcrg 15>, + <&stgcrg 16>; + + pcie_intc0: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + }; -- 2.17.1
