[PATCH v3 0/4] ARM: dts: at91: Set sst26vf064b SPI NOR flash at its maxumum frequency

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Changes in v3: Update S-o-b tag to match author's email.
Changes in v2: update value of spi-cs-setup-ns as it was changed to u32
since the first proposal.
v1 at: https://lore.kernel.org/linux-mtd/20221117105249.115649-1-tudor.ambarus@xxxxxxxxxxxxx/

---
SPI NOR flashes have specific cs-setup time requirements without which
they can't work at frequencies close to their maximum supported frequency,
as they miss the first bits of the instruction command. Unrecognized
commands are ignored, thus the flash will be unresponsive. Introduce the
spi-cs-setup-ns property to allow spi devices to specify their cs setup
time.


Tudor Ambarus (4):
  ARM: dts: at91-sama5d27_wlsom1: Set sst26vf064b SPI NOR flash at its
    maximum frequency
  ARM: dts: at91-sama5d27_som1: Set sst26vf064b SPI NOR flash at its
    maximum frequency
  ARM: dts: at91: sama5d2_icp: Set sst26vf064b SPI NOR flash at its
    maximum frequency
  ARM: dts: at91: sam9x60ek: Set sst26vf064b SPI NOR flash at its
    maximum frequency

 arch/arm/boot/dts/at91-sam9x60ek.dts        | 3 ++-
 arch/arm/boot/dts/at91-sama5d27_som1.dtsi   | 3 ++-
 arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi | 3 ++-
 arch/arm/boot/dts/at91-sama5d2_icp.dts      | 3 ++-
 4 files changed, 8 insertions(+), 4 deletions(-)

-- 
2.40.0.348.gf938b09366-goog




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux