Re: [PATCH] dt-bindings: usb: typec-tcpci: convert to DT schema format

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 23/03/2023 07:58, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@xxxxxxx>
> 
> Convert the binding to DT schema format. The default speed is HS,
> so add a dummy port@0 in the example.
> 
> Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
> ---
> 
> V1:
>  The default speed is HS, so port@0 is not added for some device tree,
>  however the usb-c-connector requires port@0. Not sure we should drop
>  the required port@0 from usb-c-connector schema or add a dummy port@0
>  for tcpci as what this patch does.

imx8mq-librem5-devkit has full port@0 so just use similar approach.

> 
>  .../devicetree/bindings/usb/typec-tcpci.txt   | 49 ------------
>  .../devicetree/bindings/usb/typec-tcpci.yaml  | 80 +++++++++++++++++++
>  2 files changed, 80 insertions(+), 49 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/usb/typec-tcpci.txt
>  create mode 100644 Documentation/devicetree/bindings/usb/typec-tcpci.yaml
> 
> diff --git a/Documentation/devicetree/bindings/usb/typec-tcpci.txt b/Documentation/devicetree/bindings/usb/typec-tcpci.txt
> deleted file mode 100644
> index 2082522b1c32..000000000000
> --- a/Documentation/devicetree/bindings/usb/typec-tcpci.txt
> +++ /dev/null
> @@ -1,49 +0,0 @@
> -TCPCI(Typec port cotroller interface) binding
> ----------------------------------------------
> -
> -Required properties:
> -- compatible:       should be set one of following:
> -		    - "nxp,ptn5110" for NXP USB PD TCPC PHY IC ptn5110.
> -
> -- reg:              the i2c slave address of typec port controller device.
> -- interrupt-parent: the phandle to the interrupt controller which provides
> -                    the interrupt.
> -- interrupts:       interrupt specification for tcpci alert.
> -
> -Required sub-node:
> -- connector: The "usb-c-connector" attached to the tcpci chip, the bindings
> -  of connector node are specified in
> -  Documentation/devicetree/bindings/connector/usb-connector.yaml
> -
> -Example:
> -
> -ptn5110@50 {
> -	compatible = "nxp,ptn5110";
> -	reg = <0x50>;
> -	interrupt-parent = <&gpio3>;
> -	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> -
> -	usb_con: connector {
> -		compatible = "usb-c-connector";
> -		label = "USB-C";
> -		data-role = "dual";
> -		power-role = "dual";
> -		try-power-role = "sink";
> -		source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
> -		sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
> -			     PDO_VAR(5000, 12000, 2000)>;
> -		op-sink-microwatt = <10000000>;
> -
> -		ports {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -
> -			port@1 {
> -				reg = <1>;
> -				usb_con_ss: endpoint {
> -					remote-endpoint = <&usb3_data_ss>;
> -				};
> -			};
> -		};
> -	};
> -};
> diff --git a/Documentation/devicetree/bindings/usb/typec-tcpci.yaml b/Documentation/devicetree/bindings/usb/typec-tcpci.yaml
> new file mode 100644
> index 000000000000..067d3b032e3d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/typec-tcpci.yaml

Is this a binding for PTN5110 or for generic tcpci? Looks like the
first, thus name should be rather device specific, so nxp,ptn5110.
Specially that there are other tcpci chips in separate bindings.

> @@ -0,0 +1,80 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/usb/typec-tcpci.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: TCPCI(Typec port cotroller interface)

Also title should be changed to device specific.

> +
> +maintainers:
> +  - Li Jun <jun.li@xxxxxxx>
> +
> +properties:
> +  compatible:
> +    const: nxp,ptn5110
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  port:
> +    description: This port is used for usb role switch.
> +    $ref: /schemas/graph.yaml#/properties/port

I don't think
> +
> +  connector:
> +    type: object
> +    $ref: /schemas/connector/usb-connector.yaml#
> +    unevaluatedProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - connector
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/usb/pd.h>
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        ptn5110@50 {

tcpci or actually more popular: usb-typec

> +            compatible = "nxp,ptn5110";
> +            reg = <0x50>;
> +            interrupt-parent = <&gpio3>;


Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux