[PATCH] dt-bindings: usb: typec-tcpci: convert to DT schema format

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Peng Fan <peng.fan@xxxxxxx>

Convert the binding to DT schema format. The default speed is HS,
so add a dummy port@0 in the example.

Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
---

V1:
 The default speed is HS, so port@0 is not added for some device tree,
 however the usb-c-connector requires port@0. Not sure we should drop
 the required port@0 from usb-c-connector schema or add a dummy port@0
 for tcpci as what this patch does.

 .../devicetree/bindings/usb/typec-tcpci.txt   | 49 ------------
 .../devicetree/bindings/usb/typec-tcpci.yaml  | 80 +++++++++++++++++++
 2 files changed, 80 insertions(+), 49 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/usb/typec-tcpci.txt
 create mode 100644 Documentation/devicetree/bindings/usb/typec-tcpci.yaml

diff --git a/Documentation/devicetree/bindings/usb/typec-tcpci.txt b/Documentation/devicetree/bindings/usb/typec-tcpci.txt
deleted file mode 100644
index 2082522b1c32..000000000000
--- a/Documentation/devicetree/bindings/usb/typec-tcpci.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-TCPCI(Typec port cotroller interface) binding
----------------------------------------------
-
-Required properties:
-- compatible:       should be set one of following:
-		    - "nxp,ptn5110" for NXP USB PD TCPC PHY IC ptn5110.
-
-- reg:              the i2c slave address of typec port controller device.
-- interrupt-parent: the phandle to the interrupt controller which provides
-                    the interrupt.
-- interrupts:       interrupt specification for tcpci alert.
-
-Required sub-node:
-- connector: The "usb-c-connector" attached to the tcpci chip, the bindings
-  of connector node are specified in
-  Documentation/devicetree/bindings/connector/usb-connector.yaml
-
-Example:
-
-ptn5110@50 {
-	compatible = "nxp,ptn5110";
-	reg = <0x50>;
-	interrupt-parent = <&gpio3>;
-	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-
-	usb_con: connector {
-		compatible = "usb-c-connector";
-		label = "USB-C";
-		data-role = "dual";
-		power-role = "dual";
-		try-power-role = "sink";
-		source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
-		sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
-			     PDO_VAR(5000, 12000, 2000)>;
-		op-sink-microwatt = <10000000>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@1 {
-				reg = <1>;
-				usb_con_ss: endpoint {
-					remote-endpoint = <&usb3_data_ss>;
-				};
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/usb/typec-tcpci.yaml b/Documentation/devicetree/bindings/usb/typec-tcpci.yaml
new file mode 100644
index 000000000000..067d3b032e3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/typec-tcpci.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/typec-tcpci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TCPCI(Typec port cotroller interface)
+
+maintainers:
+  - Li Jun <jun.li@xxxxxxx>
+
+properties:
+  compatible:
+    const: nxp,ptn5110
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  port:
+    description: This port is used for usb role switch.
+    $ref: /schemas/graph.yaml#/properties/port
+
+  connector:
+    type: object
+    $ref: /schemas/connector/usb-connector.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - connector
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/usb/pd.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ptn5110@50 {
+            compatible = "nxp,ptn5110";
+            reg = <0x50>;
+            interrupt-parent = <&gpio3>;
+            interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+            usb_con: connector {
+                compatible = "usb-c-connector";
+                label = "USB-C";
+                data-role = "dual";
+                power-role = "dual";
+                try-power-role = "sink";
+                source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
+                sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM) PDO_VAR(5000, 12000, 2000)>;
+                op-sink-microwatt = <10000000>;
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                       reg = <0>;
+                    };
+
+                    port@1 {
+                       reg = <1>;
+                       usb_con_ss: endpoint {
+                           remote-endpoint = <&usb3_data_ss>;
+                       };
+                    };
+                };
+            };
+        };
+    };
-- 
2.37.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux