On 14.03.2023 19:30, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
>
> Add the power key node under the PON node for PMIC #0 on sa8775p.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
> index 5d73212fbd16..874460d087db 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
> @@ -18,6 +18,13 @@ pmk8775_0_pon: pon@1200 {
> reg = <0x1200>, <0x800>;
> mode-recovery = <0x1>;
> mode-bootloader = <0x2>;
> +
> + pmk8775_0_pon_pwrkey: pwrkey {
> + compatible = "qcom,pmk8350-pwrkey";
> + interrupts-extended = <&spmi_bus 0x0 0x12 0x7 IRQ_TYPE_EDGE_BOTH>;
> + linux,code = <KEY_POWER>;
> + status = "disabled";
Does it make any sense to disable the power button?
Konrad
> + };
> };
> };
>
