On Tue, Mar 14, 2023 at 9:26 PM Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> wrote:
>
>
>
> On 14.03.2023 19:30, Bartosz Golaszewski wrote:
> > From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> >
> > Add the power key node under the PON node for PMIC #0 on sa8775p.
> >
> > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> > ---
> > arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi | 7 +++++++
> > 1 file changed, 7 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
> > index 5d73212fbd16..874460d087db 100644
> > --- a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
> > @@ -18,6 +18,13 @@ pmk8775_0_pon: pon@1200 {
> > reg = <0x1200>, <0x800>;
> > mode-recovery = <0x1>;
> > mode-bootloader = <0x2>;
> > +
> > + pmk8775_0_pon_pwrkey: pwrkey {
> > + compatible = "qcom,pmk8350-pwrkey";
> > + interrupts-extended = <&spmi_bus 0x0 0x12 0x7 IRQ_TYPE_EDGE_BOTH>;
> > + linux,code = <KEY_POWER>;
> > + status = "disabled";
> Does it make any sense to disable the power button?
>
Since this is an automotive platform, I'd say yes - you wouldn't
normally have physical access to the board or even be sure for it to
have a power button? But if you prefer it the other way, I won't be
dying on this hill.
Bart
> Konrad
> > + };
> > };
> > };
> >
