This patch defines common Armada 370 pinctrl settings for uart0 and
uart1 interfaces:
uart0: MPP0-1 as default
uart1: MPP41-42 as default
Note: this patch has the potential to break out-of-tree users w/o
specific pinctrl settings for their uart interfaces if the default
above does not match their config.
Suggested-by: Andrew Lunn <andrew@xxxxxxx>
Signed-off-by: Arnaud Ebalard <arno@xxxxxxxxxxxx>
---
arch/arm/boot/dts/armada-370.dtsi | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 901806f35f40..84ab0f23b857 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -126,6 +126,16 @@
marvell,function = "spi0";
};
+ uart0_pins: uart0-pins {
+ marvell,pins = "mpp0", "mpp1";
+ marvell,function = "uart0";
+ };
+
+ uart1_pins: uart1-pins {
+ marvell,pins = "mpp41", "mpp42";
+ marvell,function = "uart1";
+ };
+
spi1_pins: spi1-pins {
marvell,pins = "mpp49", "mpp50",
"mpp51", "mpp52";
@@ -288,6 +298,21 @@
pinctrl-names = "default";
};
+ /*
+ * Default UART pinctrl setting without RTS/CTS, can
+ * be overwritten on board level if a different
+ * configuration is used.
+ */
+ uart0: serial@12000 {
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+ };
+
+ uart1: serial@12100 {
+ pinctrl-0 = <&uart1_pins>;
+ pinctrl-names = "default";
+ };
+
usb@50000 {
clocks = <&coreclk 0>;
};
--
2.1.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
