Hi, This series adds .dts files for Synology DS213j (armada 370 2-bay NAS) and DS414 (armada XP 4-bay NAS) devices. It is based on comments received on a v0 submission of DS213j .dts file [1] and Andrew's comments on a v1 ( for both DS213j and DS414 .dts files) [2] and Andrew/Sebastian' comments on v2 regarding pinctrl improvements [3]. Cheers, a+ [1]: http://thread.gmane.org/gmane.linux.drivers.devicetree/95401 [2]: http://thread.gmane.org/gmane.linux.drivers.devicetree/98830 [3]: http://thread.gmane.org/gmane.linux.drivers.devicetree/98892 Changes since v2: - Added various patches to improve/refactor Armada 370/XP pinctrl nodes/properties and use sensible defaults when possible. - changed gpio-fan,speed-map to better match max rotation speed (1900 RPM) for DS213j Changes since v1: - Added a patch to fix Seiko Instruments, Inc. prefix from "ssi" to "sii" for s35390 RTC chip in kirkwood-synology.dtsi as reported by Andrew - Fixed DS414 and DS213j .dts files which had the same issue due to a blind copy-and-paste. - Added a patch for armada-xp-lenovo-ix4-300d.dts to use uart alias for stdout-path, as suggested by Andrew. - removed pinctrl properties for ethernet interface wrongly referencing a RGMII pin configuration: the PHY is connected using SGMII. - moved some DS213j pinctrl entries (spi0, uart0) in armada-370.dtsi - same thing for DS414 pinctrl entries (ge0/1, spi0) moved to armada-xp-mv78230.dtsi - changed pinctrl nodes and labels to match naming convention found in .dtsi: pmx_*: pmx- changed to *_pin: -pin. - same thing for DS414 - added a comment in the .dts file about DS414 being susceptible at boot when an USB/serial converter is connected to the UART pins. Changes since v0: - Added a comment at the beginning of DS213j and DS414j .dts file regarding the need for a recent Marvell bootloader. Arnd suggested to do a specific .dtb file for new and old bootloaders but I think if we follow this path for DS414 and DS213j, we will probably have to do it for all Armada-based synology NAS and possibly for other Armada 370/XP based devices. Opting for recent bootloaders config and having a comment is easier. It is likely that a user already has a recent bootloader. Otherwise, upgrade is a one click process anyway. If a user thinks it is easier to have two different .dts files in the kernel, she will still be able to push a patch. - Added a comment in the .dts file about the bootloader screwing the kernel if the environment is saved. - Kept GPL licence for .dts file - Fixed bad naming of node and alias (_ vs -) - Added micron vendor prefix for n25q064 flash - Disabled SoC RTC; a Seiko S-35390A is used as main RTC - Added comments about the purpose of each serial port - Added stdout-path = &uart0; to help barebox. A specific patch is included in the series to provide labels for uart serial nodes - Added patch for DS414 .dts file Arnaud Ebalard (12): of: add "micron" vendor prefix for Micron arm: mvebu: fix vendor prefix typo in kirkwood-synology.dtsi arm: mvebu: add uartX labels for Armada SoC serial nodes arm: mvebu: use recently introduced uart label for stdout-path arm: mvebu: remove duplications in pinctrl nodes for Armada 370/XP arm: mvebu: define and use common Armada 370 SPI pinctrl settings arm: mvebu: define and use common Armada 370 UART pinctrl settings arm: mvebu: define and use common Armada XP UART2/3 pinctrl settings arm: mvebu: define and use ge0/1 rgmii pinctrl settings for armada XP arm: mvebu: define and use common Armada XP SPI pinctrl setting arm: mvebu: add .dts file for Synology DS213j arm: mvebu: add .dts file for Synology DS414 .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/boot/dts/Makefile | 6 +- arch/arm/boot/dts/armada-370-db.dts | 2 + arch/arm/boot/dts/armada-370-synology-ds213j.dts | 321 ++++++++++++++++++++ arch/arm/boot/dts/armada-370-xp.dtsi | 9 +- arch/arm/boot/dts/armada-370.dtsi | 58 +++- arch/arm/boot/dts/armada-xp-axpwifiap.dts | 25 +- arch/arm/boot/dts/armada-xp-db.dts | 4 + arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts | 6 +- arch/arm/boot/dts/armada-xp-mv78230.dtsi | 7 - arch/arm/boot/dts/armada-xp-mv78260.dtsi | 7 - arch/arm/boot/dts/armada-xp-mv78460.dtsi | 7 - arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 4 + arch/arm/boot/dts/armada-xp-synology-ds414.dts | 330 +++++++++++++++++++++ arch/arm/boot/dts/armada-xp.dtsi | 52 +++- arch/arm/boot/dts/kirkwood-synology.dtsi | 2 +- 16 files changed, 788 insertions(+), 53 deletions(-) create mode 100644 arch/arm/boot/dts/armada-370-synology-ds213j.dts create mode 100644 arch/arm/boot/dts/armada-xp-synology-ds414.dts -- 2.1.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
