[PATCHv3 06/12] arm: mvebu: define and use common Armada 370 SPI pinctrl settings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




This patch defines common Armada 370 pinctrl settings for spi0 and spi1
interfaces:

 spi0: MPP33-36 as default, MPP32,63-65 as available alternate config
 spi1: MPP49-52 as default

Currently, the Armada 370 DB .dts file has no explicit pinctrl info
for the spi0 interface used to access the flash on the board. The
patch fixes that by also adding explicit pinctrl info (MPP32,63-65)
for this SPI interface.

Note: this patch has the potential to break out-of-tree users w/o
specific pinctrl settings for their spi interfaces if the default
above does not match their config.

Suggested-by: Andrew Lunn <andrew@xxxxxxx>
Signed-off-by: Arnaud Ebalard <arno@xxxxxxxxxxxx>
---
 arch/arm/boot/dts/armada-370-db.dts |  2 ++
 arch/arm/boot/dts/armada-370.dtsi   | 32 ++++++++++++++++++++++++++++++++
 2 files changed, 34 insertions(+)

diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index a495e5821ab8..c73fe9a91e59 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -135,6 +135,8 @@
 			};
 
 			spi0: spi@10600 {
+				pinctrl-0 = <&spi0_pins2>;
+				pinctrl-names = "default";
 				status = "okay";
 
 				spi-flash@0 {
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 2040da11462b..901806f35f40 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -114,6 +114,24 @@
 			pinctrl {
 				compatible = "marvell,mv88f6710-pinctrl";
 
+				spi0_pins1: spi0-pins1 {
+					marvell,pins = "mpp33", "mpp34",
+						       "mpp35", "mpp36";
+					marvell,function = "spi0";
+				};
+
+				spi0_pins2: spi0_pins2 {
+					marvell,pins = "mpp32", "mpp63",
+						       "mpp64", "mpp65";
+					marvell,function = "spi0";
+				};
+
+				spi1_pins: spi1-pins {
+					marvell,pins = "mpp49", "mpp50",
+						       "mpp51", "mpp52";
+					marvell,function = "spi1";
+				};
+
 				sdio_pins1: sdio-pins1 {
 					marvell,pins = "mpp9",  "mpp11", "mpp12",
 							"mpp13", "mpp14", "mpp15";
@@ -256,6 +274,20 @@
 				status = "disabled";
 			};
 
+			/*
+			 * Default SPI pinctrl setting, can be overwritten on
+			 * board level if a different configuration is used.
+			 */
+			spi0: spi@10600 {
+				pinctrl-0 = <&spi0_pins1>;
+				pinctrl-names = "default";
+			};
+
+			spi1: spi@10680 {
+				pinctrl-0 = <&spi1_pins>;
+				pinctrl-names = "default";
+			};
+
 			usb@50000 {
 				clocks = <&coreclk 0>;
 			};
-- 
2.1.1


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux