Re: [PATCH v2 3/7] dt-bindings: remoteproc: mpss: Document QDU1000/QRU1000 mpss devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 3/9/2023 12:33 AM, Krzysztof Kozlowski wrote:
> On 07/03/2023 00:11, Melody Olvera wrote:
>> This documents the compatible for the component used to boot the
> Do not use "This commit/patch".
> https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95

Ok.

>
>> MPSS on the QDU1000 and QRU1000 SoCs.
>>
>> The QDU1000 and QRU1000 mpss boot process now requires the specification
>> of an RMB register space to complete the handshake needed to start or
>> attach the mpss.
>>
>> Signed-off-by: Melody Olvera <quic_molvera@xxxxxxxxxxx>
>> ---
>>  .../remoteproc/qcom,qdu1000-mpss-pas.yaml     | 130 ++++++++++++++++++
>>  1 file changed, 130 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,qdu1000-mpss-pas.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,qdu1000-mpss-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,qdu1000-mpss-pas.yaml
>> new file mode 100644
>> index 000000000000..9cb4296c1fa6
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,qdu1000-mpss-pas.yaml
>> @@ -0,0 +1,130 @@
>> +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/remoteproc/qcom,qdu1000-mpss-pas.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm QDU1000 Modem Peripheral Authentication Service
>> +
>> +maintainers:
>> +  - Melody Olvera <quic_molvera@xxxxxxxxxxx>
>> +
>> +description:
>> +  Qualcomm QDU1000 SoC Peripheral Authentication Service loads and boots firmware
>> +  on the Qualcomm DSP Hexagon core.
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - qcom,qdu1000-mpss-pas
>> +
>> +  reg:
>> +    maxItems: 2
> You need to list the items instead (just like for clocks).

Will do.

>
>> +
>> +  clocks:
>> +    items:
>> +      - description: XO clock
>> +
>> +  clock-names:
>> +    items:
>> +      - const: xo
>> +
>> +  qcom,qmp:
>> +    $ref: /schemas/types.yaml#/definitions/phandle
>> +    description: Reference to the AOSS side-channel message RAM.
>> +
>> +  smd-edge: false
>> +
>> +  firmware-name:
>> +    $ref: /schemas/types.yaml#/definitions/string-array
> You can now drop the $ref.

Ok will drop.

>
>> +    items:
>> +      - description: Firmware name of the Hexagon core
>> +      - description: Firmware name of the Hexagon Devicetree
>> +
>> +  memory-region:
>> +    items:
>> +      - description: Memory region for main Firmware authentication
>> +      - description: Memory region for Devicetree Firmware authentication
>> +      - description: DSM Memory region
>> +
>> +  interrupts:
>> +    minItems: 6
>> +
>> +  interrupt-names:
>> +    minItems: 6
>> +
>> +  interconnects:
>> +    minItems: 1
> maxItems instead

Last comments said to drop this since it's redundant from qcom,pas-common.yaml. Will drop per
our discussion on https://lore.kernel.org/all/aba45ae9-8558-50c1-e5ad-dd910dacdbb3@xxxxxxxxxx/.

>
>> +
>> +  power-domains:
>> +    items:
>> +      - description: CX power domain
>> +      - description: MSS power domain
>> +
>> +  power-domain-names:
>> +    items:
>> +      - const: cx
>> +      - const: mss
>> +
>> +required:
>> +  - compatible
>> +  - reg
> memory-region
>
> (I fixed other bindings)

Ah sounds good. Will add here.

>
>> +
>> +allOf:
>> +  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
>> +
>> +unevaluatedProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/clock/qcom,rpmh.h>
>> +    #include <dt-bindings/interconnect/qcom,qdu1000-rpmh.h>
>> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
>> +    #include <dt-bindings/interrupt-controller/irq.h>
>> +    #include <dt-bindings/mailbox/qcom-ipcc.h>
>> +    #include <dt-bindings/power/qcom-rpmpd.h>
>> +
>> +    remoteproc@4080000 {
>> +        compatible = "qcom,qdu1000-mpss-pas";
>> +        reg = <0x4080000 0x4040>,
>> +              <0x4180000 0x1000>;
>> +
>> +        clocks = <&rpmhcc RPMH_CXO_CLK>;
>> +        clock-names = "xo";
>> +
>> +        interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
>> +                              <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
>> +                              <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
>> +                              <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
>> +                              <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
>> +                              <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
>> +        interrupt-names = "wdog", "fatal", "ready", "handover",
>> +                          "stop-ack", "shutdown-ack";
>> +
>> +        memory-region = <&mpss_mem>, <&dtb_mpss_mem>, <&mpss_dsm_mem>;
>> +
>> +        firmware-name = "qcom/qdu1000/modem.mbn",
>> +                        "qcom/qdu1000/modem_dtb.mbn";
>> +
>> +        power-domains = <&rpmhpd QDU1000_CX>,
>> +                        <&rpmhpd QDU1000_MSS>;
>> +        power-domain-names = "cx", "mss";
>> +
>> +        interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>;
>> +
>> +        qcom,qmp = <&aoss_qmp>;
>> +
>> +        qcom,smem-states = <&smp2p_adsp_out 0>;
>> +        qcom,smem-state-names = "stop";
>> +
>> +        glink-edge {
>> +            interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
>> +                                         IPCC_MPROC_SIGNAL_GLINK_QMP
>> +                                         IRQ_TYPE_EDGE_RISING>;
>> +            mboxes = <&ipcc IPCC_CLIENT_MPSS IPCC_MPROC_SIGNAL_GLINK_QMP>;
>> +
>> +            label = "modem";
>> +            qcom,remote-pid = <2>;
>> +
> Drop stray blank line

Got it. Also per https://lore.kernel.org/all/aba45ae9-8558-50c1-e5ad-dd910dacdbb3@xxxxxxxxxx/.

Apologies for missing some comments.

Thanks,
Melody
>> +        };
>> +    };
> Best regards,
> Krzysztof
>




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux