This documents the compatible for the component used to boot the MPSS on the QDU1000 and QRU1000 SoCs. The QDU1000 and QRU1000 mpss boot process now requires the specification of an RMB register space to complete the handshake needed to start or attach the mpss. Signed-off-by: Melody Olvera <quic_molvera@xxxxxxxxxxx> --- .../remoteproc/qcom,qdu1000-mpss-pas.yaml | 130 ++++++++++++++++++ 1 file changed, 130 insertions(+) create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,qdu1000-mpss-pas.yaml diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,qdu1000-mpss-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,qdu1000-mpss-pas.yaml new file mode 100644 index 000000000000..9cb4296c1fa6 --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/qcom,qdu1000-mpss-pas.yaml @@ -0,0 +1,130 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/remoteproc/qcom,qdu1000-mpss-pas.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm QDU1000 Modem Peripheral Authentication Service + +maintainers: + - Melody Olvera <quic_molvera@xxxxxxxxxxx> + +description: + Qualcomm QDU1000 SoC Peripheral Authentication Service loads and boots firmware + on the Qualcomm DSP Hexagon core. + +properties: + compatible: + enum: + - qcom,qdu1000-mpss-pas + + reg: + maxItems: 2 + + clocks: + items: + - description: XO clock + + clock-names: + items: + - const: xo + + qcom,qmp: + $ref: /schemas/types.yaml#/definitions/phandle + description: Reference to the AOSS side-channel message RAM. + + smd-edge: false + + firmware-name: + $ref: /schemas/types.yaml#/definitions/string-array + items: + - description: Firmware name of the Hexagon core + - description: Firmware name of the Hexagon Devicetree + + memory-region: + items: + - description: Memory region for main Firmware authentication + - description: Memory region for Devicetree Firmware authentication + - description: DSM Memory region + + interrupts: + minItems: 6 + + interrupt-names: + minItems: 6 + + interconnects: + minItems: 1 + + power-domains: + items: + - description: CX power domain + - description: MSS power domain + + power-domain-names: + items: + - const: cx + - const: mss + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/remoteproc/qcom,pas-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interconnect/qcom,qdu1000-rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/mailbox/qcom-ipcc.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + remoteproc@4080000 { + compatible = "qcom,qdu1000-mpss-pas"; + reg = <0x4080000 0x4040>, + <0x4180000 0x1000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + memory-region = <&mpss_mem>, <&dtb_mpss_mem>, <&mpss_dsm_mem>; + + firmware-name = "qcom/qdu1000/modem.mbn", + "qcom/qdu1000/modem_dtb.mbn"; + + power-domains = <&rpmhpd QDU1000_CX>, + <&rpmhpd QDU1000_MSS>; + power-domain-names = "cx", "mss"; + + interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "modem"; + qcom,remote-pid = <2>; + + }; + }; -- 2.25.1
