Add LEDs definition example for qca8k using the offload trigger as the
default trigger and add all the supported offload triggers by the
switch.
Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
---
.../devicetree/bindings/net/dsa/qca8k.yaml | 24 +++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
index 389892592aac..ba3821364039 100644
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
@@ -18,6 +18,8 @@ description:
PHY it is connected to. In this config, an internal mdio-bus is registered and
the MDIO master is used for communication. Mixed external and internal
mdio-bus configurations are not supported by the hardware.
+ Each phy have at least 3 LEDs connected and can be declared
+ using the standard LEDs structure.
properties:
compatible:
@@ -117,6 +119,7 @@ unevaluatedProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/leds/common.h>
mdio {
#address-cells = <1>;
@@ -276,6 +279,27 @@ examples:
internal_phy_port1: ethernet-phy@0 {
reg = <0>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <1>;
+ linux,default-trigger = "netdev";
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <1>;
+ linux,default-trigger = "netdev";
+ };
+ };
};
internal_phy_port2: ethernet-phy@1 {
--
2.38.1
