Since ath10k now supports loading the pre-cal via NVMEM instead of having
to use userspace scripts, lets use it.
Signed-off-by: Robert Marko <robert.marko@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
index bb0c888b048ec..d90b4f4c63afe 100644
--- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
@@ -170,6 +170,17 @@ partition@170000 {
label = "ART";
reg = <0x00170000 0x00010000>;
read-only;
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ precal_art_1000: precal@1000 {
+ reg = <0x1000 0x2f20>;
+ };
+
+ precal_art_5000: precal@5000 {
+ reg = <0x5000 0x2f20>;
+ };
};
partition@180000 {
@@ -233,10 +244,14 @@ &mdio {
&wifi0 {
status = "okay";
+ nvmem-cell-names = "pre-calibration";
+ nvmem-cells = <&precal_art_1000>;
};
&wifi1 {
status = "okay";
+ nvmem-cell-names = "pre-calibration";
+ nvmem-cells = <&precal_art_5000>;
qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC";
};
--
2.39.1
