Hi, Correct the number of GPIOs in TLMM pin controller. I really hope I got it right... The last number of gpio-ranges is the number of GPIOs. See: Documentation/devicetree/bindings/gpio/gpio.txt The examples in bindings were fixed here: https://lore.kernel.org/linux-arm-msm/20230201153019.269718-1-krzysztof.kozlowski@xxxxxxxxxx/T/#t Not realy tested, but I do not expect troubles, unless I missed some obvious stuff (like a number in pinctrl driver). Best regards, Krzysztof Krzysztof Kozlowski (14): ARM: dts: qcom: sdx55: correct TLMM gpio-ranges ARM: dts: qcom: sdx65: correct TLMM gpio-ranges arm64: dts: qcom: msm8953: correct TLMM gpio-ranges arm64: dts: qcom: sc7180: correct TLMM gpio-ranges arm64: dts: qcom: sc8280xp: correct TLMM gpio-ranges arm64: dts: qcom: sdm670: correct TLMM gpio-ranges arm64: dts: qcom: sdm845: correct TLMM gpio-ranges arm64: dts: qcom: sm6115: correct TLMM gpio-ranges arm64: dts: qcom: sm6125: correct TLMM gpio-ranges arm64: dts: qcom: sm6350: correct TLMM gpio-ranges arm64: dts: qcom: sm6375: correct TLMM gpio-ranges arm64: dts: qcom: sm8150: correct TLMM gpio-ranges arm64: dts: qcom: sm8450: correct TLMM gpio-ranges arm64: dts: qcom: sm8550: correct TLMM gpio-ranges arch/arm/boot/dts/qcom-sdx55.dtsi | 2 +- arch/arm/boot/dts/qcom-sdx65.dtsi | 2 +- arch/arm64/boot/dts/qcom/msm8953.dtsi | 2 +- arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 +- arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 2 +- arch/arm64/boot/dts/qcom/sdm670.dtsi | 2 +- arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 +- arch/arm64/boot/dts/qcom/sm6115.dtsi | 2 +- arch/arm64/boot/dts/qcom/sm6125.dtsi | 2 +- arch/arm64/boot/dts/qcom/sm6350.dtsi | 2 +- arch/arm64/boot/dts/qcom/sm6375.dtsi | 2 +- arch/arm64/boot/dts/qcom/sm8150.dtsi | 2 +- arch/arm64/boot/dts/qcom/sm8450.dtsi | 2 +- arch/arm64/boot/dts/qcom/sm8550.dtsi | 2 +- 14 files changed, 14 insertions(+), 14 deletions(-) -- 2.34.1
