This patch adds a driver for NXP bluetooth chipsets. The driver is based on H4 protocol, and uses serdev APIs. It supports host to chip power save feature, which is signalled by the host by asserting break over UART TX lines, to put the chip into sleep state. To support this feature, break_ctl has also been added to serdev-tty along with a new serdev API serdev_device_break_ctl(). This driver is capable of downloading chip specific firmware, where user can either define the firmware file name in DTS file, or in the user-space config file. Each chip has a unique bootloader signature, and the driver is capable of selecting firmware file based on the signature received. The document specifying device tree bindings for this driver is also included in this patch series. Neeraj Sanjay Kale (3): serdev: Add method to assert break dt-bindings: net: bluetooth: Add NXP bluetooth support Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets .../bindings/net/bluetooth/nxp-bluetooth.yaml | 45 + MAINTAINERS | 6 + drivers/bluetooth/Kconfig | 11 + drivers/bluetooth/Makefile | 1 + drivers/bluetooth/btnxp.c | 947 ++++++++++++++++++ drivers/bluetooth/btnxp.h | 188 ++++ drivers/tty/serdev/core.c | 11 + drivers/tty/serdev/serdev-ttyport.c | 12 + include/linux/serdev.h | 6 + 9 files changed, 1227 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/bluetooth/nxp-bluetooth.yaml create mode 100644 drivers/bluetooth/btnxp.c create mode 100644 drivers/bluetooth/btnxp.h -- 2.34.1
