They are not used on all boards, so disable them by default.
Enable them back on MTP/RB5, which were the only current users.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 6 ++++++
arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 6 ++++++
arch/arm64/boot/dts/qcom/sm8250.dtsi | 4 ++++
3 files changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index 8c64cb060e21..6802d36fb20c 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -1007,6 +1007,8 @@ can@0 {
};
&swr0 {
+ status = "okay";
+
left_spkr: speaker@0,3 {
compatible = "sdw10217211000";
reg = <0 3>;
@@ -1322,6 +1324,10 @@ &venus {
status = "okay";
};
+&wsamacro {
+ status = "okay";
+};
+
/* PINCTRL - additions to nodes defined in sm8250.dtsi */
&qup_spi0_cs_gpio {
drive-strength = <6>;
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index 0991b34a8e49..c0d83fa9a73b 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -759,6 +759,8 @@ codec {
};
&swr0 {
+ status = "okay";
+
left_spkr: speaker@0,3 {
compatible = "sdw10217211000";
reg = <0 3>;
@@ -892,3 +894,7 @@ &usb_2_qmpphy {
&venus {
status = "okay";
};
+
+&wsamacro {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 95f1a6afcd43..a0ba166f89d8 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2277,6 +2277,8 @@ wsamacro: codec@3240000 {
pinctrl-names = "default";
pinctrl-0 = <&wsa_swr_active>;
+
+ status = "disabled";
};
swr0: soundwire-controller@3250000 {
@@ -2297,6 +2299,8 @@ swr0: soundwire-controller@3250000 {
#sound-dai-cells = <1>;
#address-cells = <2>;
#size-cells = <0>;
+
+ status = "disabled";
};
audiocc: clock-controller@3300000 {
--
2.39.1
