Hi Krzysztof, Thank you for your feedback and efforts. I apologize for some missing points of v2 patch. I tried to do my best. I will be more careful to fix all feedback before sending new patch so I want to ask a few things before sending v3 patch On Tue, 27 Dec 2022 10:54 AM Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> wrote: > On 26/12/2022 23:38, Okan Sahin wrote: > > The bindings for MAX77541 MFD driver. It also > > > 1. You did not follow entirely my advice here. Read again what I asked you to fix > in commit msg. > > 2. No improvements in subject - ignored comment. > > > > includes MAX77540 driver whose regmap is covered by MAX77541. > > > > Signed-off-by: Okan Sahin <okan.sahin@xxxxxxxxxx> > > --- > > .../devicetree/bindings/mfd/adi,max77541.yaml | 102 ++++++++++++++++++ > > MAINTAINERS | 1 + > > 2 files changed, 103 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/mfd/adi,max77541.yaml > > > > diff --git a/Documentation/devicetree/bindings/mfd/adi,max77541.yaml > > b/Documentation/devicetree/bindings/mfd/adi,max77541.yaml > > new file mode 100644 > > index 000000000000..50f93cb0bb66 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/mfd/adi,max77541.yaml > > @@ -0,0 +1,102 @@ > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 > > +--- > > +$id: > > +https://urldefense.com/v3/__http://devicetree.org/schemas/mfd/adi,max > > > +77541.yaml*__;Iw!!A3Ni8CS0y2Y!5i9A0O1bNDHqRib46J285KCGbVLbqULqRRa > 153Q > > +XIaclV3BEUrMbK0XAuXk3meed6XG3y7HigRu81P9dqjnUsb9S3g2t$ > > +$schema: > > +https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.y > > > +aml*__;Iw!!A3Ni8CS0y2Y!5i9A0O1bNDHqRib46J285KCGbVLbqULqRRa153QXIa > clV3 > > +BEUrMbK0XAuXk3meed6XG3y7HigRu81P9dqjnUsRlxWY6o$ > > + > > +title: MAX77540/MAX77541 PMIC from ADI. > > Drop tralling full stop. > > > + > > +maintainers: > > + - Okan Sahin <okan.sahin@xxxxxxxxxx> > > + > > +description: | > > + MAX77540 is a Power Management IC with 2 buck regulators. > > + > > + MAX77541 is a Power Management IC with 2 buck regulators and 1 ADC. > > + > > +properties: > > + compatible: > > + enum: > > + - adi,max77540 > > + - adi,max77541 > > + > > + reg: > > + maxItems: 1 > > + > > + interrupts: > > + maxItems: 1 > > + > > + regulators: > > + $ref: ../regulator/adi,max77541-regulator.yaml# > > Wrong path - it should be full path with /schemas/ just like it was last time. > However such file does not exist, so again as I said - you did not test this patch. > It's non-bisectable patchset. Order it properly. don't ignore the comments. > > > + > > + adc: > > + type: object > > + additionalProperties: false > > + properties: > > + compatible: > > + const: adi,max77541-adc > > This is a friendly reminder during the review process. > > It seems my previous comments were not fully addressed. Maybe my feedback > got lost between the quotes, maybe you just forgot to apply it. > Please go back to the previous discussion and either implement all requested > changes or keep discussing them. > > Thank you. Honestly, I don't quite understand what you're suggesting regarding the adc part. I thought I should add the adc as an object since it is in the mfd device. Do I need to remove this part? > > > + > > + required: > > + - compatible > > + > > +required: > > + - compatible > > + - reg > > + - interrupts > > + > > +allOf: > > + - if: > > + properties: > > + compatible: > > + contains: > > + const: adi,max77540 > > + then: > > + properties: > > + regulator: > > + properties: > > + compatible: > > + const: adi,max77540-regulator > > + else: > > + properties: > > + regulator: > > + properties: > > + compatible: > > + const: adi,max77541-regulator > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/interrupt-controller/irq.h> > > + > > + i2c { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + pmic@69 { > > + compatible = "adi,max77541"; > > + reg = <0x69>; > > + interrupt-parent = <&gpio>; > > + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; > > + > > + regulators { > > + BUCK1 { > > + regulator-min-microvolt = <500000>; > > + regulator-max-microvolt = <5200000>; > > + regulator-boot-on; > > + regulator-always-on; > > + }; > > + BUCK2 { > > + regulator-min-microvolt = <500000>; > > + regulator-max-microvolt = <5200000>; > > + regulator-boot-on; > > + regulator-always-on; > > + }; > > + }; > > + > > + adc { > > + compatible = "adi,max77541-adc"; > > + }; > > + }; > > + }; > > + > > Stray new line. Drop it. > > Best regards, > Krzysztof Best regards, Okan
