From: Manikandan Muralidharan <manikandan.m@xxxxxxxxxxxxx>
Fixed the label numbering of the flexcom functions so that all
13 flexcom functions of sam9x60 are in the following order when the missing
flexcom functions are added:
flx0: uart0, spi0, i2c0
flx1: uart1, spi1, i2c1
flx2: uart2, spi2, i2c2
flx3: uart3, spi3, i2c3
flx4: uart4, spi4, i2c4
flx5: uart5, spi5, i2c5
flx6: uart6, i2c6
flx7: uart7, i2c7
flx8: uart8, i2c8
flx9: uart9, i2c9
flx10: uart10, i2c10
flx11: uart11, i2c11
flx12: uart12, i2c12
Signed-off-by: Manikandan Muralidharan <manikandan.m@xxxxxxxxxxxxx>
Signed-off-by: Durai Manickam KR <durai.manickamkr@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/at91-sam9x60ek.dts | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index d929c1ba5789..cf5d786531f2 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -16,8 +16,8 @@ / {
aliases {
i2c0 = &i2c0;
- i2c1 = &i2c1;
- serial1 = &uart1;
+ i2c1 = &i2c6;
+ serial1 = &uart5;
};
chosen {
@@ -234,7 +234,7 @@ &flx4 {
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
status = "disabled";
- spi0: spi@400 {
+ spi4: spi@400 {
compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -253,7 +253,7 @@ &flx5 {
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
status = "okay";
- uart1: serial@200 {
+ uart5: serial@200 {
compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
@@ -279,7 +279,7 @@ &flx6 {
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
status = "okay";
- i2c1: i2c@600 {
+ i2c6: i2c@600 {
compatible = "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -439,7 +439,7 @@ AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE
AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
- pinctrl_flx5_default: flx_uart {
+ pinctrl_flx5_default: flx5_uart {
atmel,pins =
<AT91_PIOA 7 AT91_PERIPH_C AT91_PINCTRL_NONE
AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE
--
2.25.1
