This series of patches is meant to address the following:
- Moving of flexcom definitions from board file to SoC file and
some minor changes to its properties.
- Add support for the new sam9x60 curiosity board based on the
existing sam9x60 SoC.
Changes in v4:
--------------
- Added the missed property atmel,usart-mode in uart5
- Renamed the led label.
Changes in v3:
--------------
- Updated commit logs mentioning each author's contribution.
- Author name is updated based on the linux mainline guidelines.
- updated the description file such that sam9x60 curiosity is
added together with sam9x60ek as an enum.
- Updated the entries in the regulator container alphabetically
sorted.
- Added label name and node name following the guidelines.
Changes in v2:
--------------
- Added generic names for regulator node.
- Removed the #addredd-cells and #size-cells property which shows
compilation warning.
- Removed the property "status=okay" as this is default.
- No underscores used for the pinctrl definitions and node names.
- Organised the patches in the logical way.
- Bindings are made separate patch.
Durai Manickam KR (4):
ARM: dts: at91: sam9x60: move flexcom definitions
ARM: dts: at91: sam9x60: fix spi4 node
dt-bindings: arm: at91: Add info on sam9x60 curiosity
ARM: dts: at91: sam9x60_curiosity: Add device tree for sam9x60
curiosity board
Manikandan Muralidharan (4):
ARM: dts: at91: sam9x60: Fix the label numbering for the flexcom
functions
ARM: dts: at91: sam9x60: Specify the FIFO size for the Flexcom UART
ARM: dts: at91: sam9x60: Add DMA bindings for the flexcom nodes
ARM: dts: at91: sam9x60: Add missing flexcom definitions
.../devicetree/bindings/arm/atmel-at91.yaml | 6 +-
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/at91-sam9x60_curiosity.dts | 499 ++++++++++++++
arch/arm/boot/dts/at91-sam9x60ek.dts | 50 +-
arch/arm/boot/dts/sam9x60.dtsi | 622 ++++++++++++++++++
5 files changed, 1136 insertions(+), 42 deletions(-)
create mode 100644 arch/arm/boot/dts/at91-sam9x60_curiosity.dts
--
2.25.1
