"make dtbs_check":
arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dtb: clock-generator@6a: 'idt,shutdown' is a required property
From schema: Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dtb: clock-generator@6a: 'idt,output-enable-active' is a required property
From schema: Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
Versaclock 5 clock generators can have their configuration stored in
One-Time Programmable (OTP) memory. Hence there is no need to specify
DT properties for manual configuration if the OTP has been programmed
before. Likewise, the Linux driver does not touch the SD/OE bits if the
corresponding properties are not specified, cfr. commit d83e561d43bc71e5
("clk: vc5: Add properties for configuring SD/OE behavior").
Reflect this in the bindings by making the "idt,shutdown" and
"idt,output-enable-active" properties not required, just like the
various "idt,*" properties in the per-output child nodes.
Fixes: 275e4e2dc0411508 ("dt-bindings: clk: vc5: Add properties for configuring the SD/OE pin")
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
Documentation/devicetree/bindings/clock/idt,versaclock5.yaml | 2 --
1 file changed, 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
index 61b246cf5e72aa47..a5472bbfb8d1fdcc 100644
--- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
+++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
@@ -125,8 +125,6 @@ required:
- compatible
- reg
- '#clock-cells'
- - idt,shutdown
- - idt,output-enable-active
allOf:
- if:
--
2.34.1
