Re: [PATCH 3/3] arm64: dts: mediatek: enable USB device port for mt8195-demo board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05/01/2023 10:28, Macpaul Lin wrote:
> 1. Enable USB device port (USB port0).
> 2. Enable u2 speed for other USB HOST (USB port1/2/3).
> 3. Configure mt6360 (TYPEC) related pinctrls.
> 
> Note: Full dual-role switch capability requires TYPEC MUX driver and dts
> update will be send in separate patches.
> 
> Signed-off-by: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 51 ++++++++++++++++++++
>  1 file changed, 51 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
> index 07a864cb8b54..207bb5f4c58f 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
> @@ -12,6 +12,7 @@
>  #include <dt-bindings/input/input.h>
>  #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
>  #include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
> +#include <dt-bindings/usb/pd.h>
>  
>  / {
>  	model = "MediaTek MT8195 demo board";
> @@ -380,6 +381,22 @@
>  		};
>  	};
>  
> +	mt6360_pins: mt6360-pins {
> +		pins {
> +			pinmux = <PINMUX_GPIO100__FUNC_GPIO100>,
> +				 <PINMUX_GPIO101__FUNC_GPIO101>;
> +			input-enable;
> +			bias-pull-up;
> +		};
> +	};
> +
> +	u3_p0_vbus: u3_p0vbusdefault {

No underscores in node names. Also does not look correct naming. Please
run `make dtbs_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).

> +		pins_cmd_dat {

Same problem.



Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux