[PATCH 3/3] arm64: dts: mediatek: enable USB device port for mt8195-demo board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



1. Enable USB device port (USB port0).
2. Enable u2 speed for other USB HOST (USB port1/2/3).
3. Configure mt6360 (TYPEC) related pinctrls.

Note: Full dual-role switch capability requires TYPEC MUX driver and dts
update will be send in separate patches.

Signed-off-by: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
---
 arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 51 ++++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
index 07a864cb8b54..207bb5f4c58f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
@@ -12,6 +12,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
 #include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+#include <dt-bindings/usb/pd.h>
 
 / {
 	model = "MediaTek MT8195 demo board";
@@ -380,6 +381,22 @@
 		};
 	};
 
+	mt6360_pins: mt6360-pins {
+		pins {
+			pinmux = <PINMUX_GPIO100__FUNC_GPIO100>,
+				 <PINMUX_GPIO101__FUNC_GPIO101>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	u3_p0_vbus: u3_p0vbusdefault {
+		pins_cmd_dat {
+			pinmux = <PINMUX_GPIO63__FUNC_VBUSVALID>;
+			input-enable;
+		};
+	};
+
 	uart0_pins: uart0-pins {
 		pins {
 			pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
@@ -393,6 +410,14 @@
 				 <PINMUX_GPIO103__FUNC_URXD1>;
 		};
 	};
+
+	usb_otg_vbus: usb-otg-vbus-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "otg-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+	};
 };
 
 
@@ -412,6 +437,22 @@
 	status = "okay";
 };
 
+&u3port0 {
+	status = "okay";
+};
+
+&u2port1 {
+	status = "okay";
+};
+
+&u2port2 {
+	status = "okay";
+};
+
+&u2port3 {
+	status = "okay";
+};
+
 &u3phy0 {
 	status = "okay";
 };
@@ -428,6 +469,16 @@
 	status = "okay";
 };
 
+&ssusb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&u3_p0_vbus>;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	dr_mode = "otg";
+	mediatek,usb3-drd;
+	usb-role-switch;
+	status = "okay";
+};
+
 &xhci0 {
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	vbus-supply = <&otg_vbus_regulator>;
-- 
2.18.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux