Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip.
While at it, fix the node name according to device tree spec
recommendations. The EEPROM is a separate node anyway.
Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
---
Changes in v3:
* Squashed into a single patch
arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi | 4 ++--
arch/arm/boot/dts/mba6ulx.dtsi | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi
index eca94ed6451b..57e647fc3237 100644
--- a/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi
+++ b/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi
@@ -116,8 +116,8 @@ reg_vldo4: vldo4 {
};
};
- jc42_1a: eeprom-temperature-sensor@1a {
- compatible = "nxp,se97", "jedec,jc-42.4-temp";
+ jc42_1a: eeprom-temperature@1a {
+ compatible = "nxp,se97b", "jedec,jc-42.4-temp";
reg = <0x1a>;
};
diff --git a/arch/arm/boot/dts/mba6ulx.dtsi b/arch/arm/boot/dts/mba6ulx.dtsi
index b8e576ab8860..d08f525acfe5 100644
--- a/arch/arm/boot/dts/mba6ulx.dtsi
+++ b/arch/arm/boot/dts/mba6ulx.dtsi
@@ -229,7 +229,7 @@ tlv320aic32x4: audio-codec@18 {
};
jc42: temperature-sensor@19 {
- compatible = "nxp,se97", "jedec,jc-42.4-temp";
+ compatible = "nxp,se97b", "jedec,jc-42.4-temp";
reg = <0x19>;
};
--
2.34.1
