[PATCH v3 1/2] arm64: dts: tqma8m*: Fix temperature sensor compatible

[Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>]

Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip.
While at it, fix the node name according to device tree spec
recommendations. The EEPROM is a separate node anyway.

Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
---
Changes in v3:
* Squashed into a single patch

 arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi         | 4 ++--
 arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi         | 4 ++--
 arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 5 ++---
 arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi         | 5 ++---
 arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi           | 4 ++--
 arch/arm64/boot/dts/freescale/mba8mx.dtsi                   | 4 ++--
 6 files changed, 12 insertions(+), 14 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
index 88d89cd46c74..b4466a26d838 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
@@ -87,8 +87,8 @@ &i2c1 {
 	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
-	sensor0: temperature-sensor-eeprom@1b {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	sensor0: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1b>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi
index 48b965386e87..391ca5516e4c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi
@@ -77,8 +77,8 @@ &i2c1 {
 	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
-	sensor0: temperature-sensor-eeprom@1b {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	sensor0: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1b>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
index 25cbe333ab8f..34b62d8c76a0 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -510,9 +510,8 @@ tlv320aic3x04: audio-codec@18 {
 		ldoin-supply = <&reg_vcc_3v3>;
 	};
 
-	/* NXP SE97BTP with temperature sensor + eeprom */
-	se97_1c: temperature-sensor-eeprom@1c {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	se97_1c: temperature-sensor@1c {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1c>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
index 7bd680a926ce..ebc29a950ba9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
@@ -63,9 +63,8 @@ &i2c1 {
 	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
-	/* NXP SE97BTP with temperature sensor + eeprom */
-	se97: temperature-sensor-eeprom@1b {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	se97: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1b>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
index 9a95e30fb42d..5ca6b2252546 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
@@ -194,8 +194,8 @@ vgen6_reg: vgen6 {
 		};
 	};
 
-	sensor0: temperature-sensor-eeprom@1b {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	sensor0: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1b>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
index 3283af9888cf..d41f75b53bde 100644
--- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi
+++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
@@ -283,8 +283,8 @@ tlv320aic3x04: audio-codec@18 {
 		ldoin-supply = <&reg_vcc_3v3>;
 	};
 
-	sensor1: sensor@1f {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	sensor1: temperator-sensor@1f {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1f>;
 	};
 
-- 
2.34.1