On 07/12/2022 13:04, MD Danish Anwar wrote: > Introducing enum pruss_pru_id for PRU Core Identifiers. > PRUSS_PRU0 indicates PRU Core 0. > PRUSS_PRU1 indicates PRU Core 1. > PRUSS_NUM_PRUS indicates the total number of PRU Cores. > > Signed-off-by: MD Danish Anwar <danishanwar@xxxxxx> Reviewed-by: Roger Quadros <rogerq@xxxxxxxxxx> -- cheers, -roger > --- > drivers/remoteproc/pru_rproc.c | 7 ++++--- > include/linux/pruss.h | 32 ++++++++++++++++++++++++++++++++ > 2 files changed, 36 insertions(+), 3 deletions(-) > create mode 100644 include/linux/pruss.h > > diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c > index 128bf9912f2c..a1a208b31846 100644 > --- a/drivers/remoteproc/pru_rproc.c > +++ b/drivers/remoteproc/pru_rproc.c > @@ -16,6 +16,7 @@ > #include <linux/module.h> > #include <linux/of_device.h> > #include <linux/of_irq.h> > +#include <linux/pruss.h> > #include <linux/pruss_driver.h> > #include <linux/remoteproc.h> > > @@ -438,7 +439,7 @@ static void *pru_d_da_to_va(struct pru_rproc *pru, u32 da, size_t len) > dram0 = pruss->mem_regions[PRUSS_MEM_DRAM0]; > dram1 = pruss->mem_regions[PRUSS_MEM_DRAM1]; > /* PRU1 has its local RAM addresses reversed */ > - if (pru->id == 1) > + if (pru->id == PRUSS_PRU1) > swap(dram0, dram1); > shrd_ram = pruss->mem_regions[PRUSS_MEM_SHRD_RAM2]; > > @@ -747,14 +748,14 @@ static int pru_rproc_set_id(struct pru_rproc *pru) > case RTU0_IRAM_ADDR_MASK: > fallthrough; > case PRU0_IRAM_ADDR_MASK: > - pru->id = 0; > + pru->id = PRUSS_PRU0; > break; > case TX_PRU1_IRAM_ADDR_MASK: > fallthrough; > case RTU1_IRAM_ADDR_MASK: > fallthrough; > case PRU1_IRAM_ADDR_MASK: > - pru->id = 1; > + pru->id = PRUSS_PRU1; > break; > default: > ret = -EINVAL; > diff --git a/include/linux/pruss.h b/include/linux/pruss.h > new file mode 100644 > index 000000000000..fbe4fbb45807 > --- /dev/null > +++ b/include/linux/pruss.h > @@ -0,0 +1,32 @@ > +/* SPDX-License-Identifier: GPL-2.0-only */ > +/** > + * PRU-ICSS Subsystem user interfaces > + * > + * Copyright (C) 2015-2022 Texas Instruments Incorporated - http://www.ti.com > + * Suman Anna <s-anna@xxxxxx> > + */ > + > +#ifndef __LINUX_PRUSS_H > +#define __LINUX_PRUSS_H > + > +#include <linux/device.h> > +#include <linux/types.h> > + > +#define PRU_RPROC_DRVNAME "pru-rproc" > + > +/** > + * enum pruss_pru_id - PRU core identifiers > + * @PRUSS_PRU0: PRU Core 0. > + * @PRUSS_PRU1: PRU Core 1. > + * @PRUSS_NUM_PRUS: Total number of PRU Cores available. > + * > + */ > + > +enum pruss_pru_id { > + PRUSS_PRU0 = 0, > + PRUSS_PRU1, > + PRUSS_NUM_PRUS, > +}; > + > + > +#endif /* __LINUX_PRUSS_H */ > \ No newline at end of file
