The Programmable Real-Time Unit and Industrial Communication Subsystem (PRU-ICSS or simply PRUSS) on various TI SoCs consists of dual 32-bit RISC cores (Programmable Real-Time Units, or PRUs) for program execution. There are 3 foundation components for PRUSS subsystem: the PRUSS platform driver, the PRUSS INTC driver and the PRUSS remoteproc driver. All were already merged and can be found under: 1) drivers/soc/ti/pruss.c Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml 2) drivers/irqchip/irq-pruss-intc.c Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml 3) drivers/remoteproc/pru_rproc.c Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml The programmable nature of the PRUs provide flexibility to implement custom peripheral interfaces, fast real-time responses, or specialized data handling. Example of a PRU consumer drivers will be: - Software UART over PRUSS - PRU-ICSS Ethernet EMAC In order to make usage of common PRU resources and allow the consumer drivers to configure the PRU hardware for specific usage the PRU API is introduced. This is the v11 of the patch series [1]. This version of the patchset addresses the comments made on v10 [10] of the series. Two more patch series have been posted ([2] and [3]) that depends on this series, one has been posted to the soc/ti/ tree and another to the networking tree. All the 3 series including this one, has been sent as RFC [4] to get comments and to explain the dependencies. Changes from v10 to v11 : *) Re-ordered the patches 2/6 and 3/6 of the series as asked by Roger. Now the 2/6 patch of the series introduces the enum pruss_pru_id and the header file <linux/pruss.h>. The patch 3/6 of the series introduces the pru_rproc_get() and pru_rproc_put() APIS with their actua desired arguments. Changes from v9 [9] to v10 : *) There was compilation issue in v9 of the series because of dependencies between 2nd and 3rd patch of the series. Fixed the dependencies in this series. *) Added enum documentation following the kernel-doc style [11] as asked by Roger for 3/6 patch of the series. Changes from v8 [8] to v9 : *) Fixed the warnings generated by running checkpatch.pl script. *) Added Review/Ack tags. *) Listed just the SoBs tags for all the patches as suggested by Mathieu. *) Removed a comment for an already documented field in patch 5/6 of this series. Changes from v7 [7] to v8 : *) Removed get_device(&rproc->dev) from API __pru_rproc_get() in patch 2/5 of this series as asked by Roger. *) Replaced all the SoBs (other than mine) to Co-developed-by tags for all the patches in this series as asked by Mathieu. *) Added a new patch (3/6) in this series for Introduction of pruss_pru_id enum. Previously this enum was part of patch 2/6. As asked by Roger removed this enum (and the APIs that are using the enum) from patch 2/6 and added it in new patch. *) Removed a comment for an already documented field in patch 2/6 of this series. *) Changed 'pru' to 'PRU' in comment of API pru_rproc_set_firmware() as asked by Roger. Changes from v6 [6] to v7 : *) Removed example section from ti,pru-consumer.yaml as the full example included compatible property as well which is not introduced in this series thus creating dt check binding error. Removing the example section fixes the dt binding check error. The example section will be included in "ti,icssg-prueth.yaml" in the next version of series [3] *) Updated the commit message for patch 1/5 of this series to address Krzysztof's comment. Changes from v5 [5] to v6 : *) Added rproc_get_by_phandle() in pru_rproc_get() *) Provided background of Ctable in the commit messege. *) Removed patch "" [12] (6th Patch of the v5 of this series) as it has dependency on series [2], thus creating a cyclic dependency. The patch [12] will be sent along with the next version of series [2]. [1] https://patchwork.kernel.org/project/linux-remoteproc/cover/20220603121520.13730-1-p-mohan@xxxxxx/ [2] https://lore.kernel.org/all/20220418123004.9332-1-p-mohan@xxxxxx/ [3] https://lore.kernel.org/all/20220531095108.21757-1-p-mohan@xxxxxx/ [4] https://patchwork.kernel.org/project/linux-remoteproc/cover/20220406094358.7895-1-p-mohan@xxxxxx/ [5] https://lore.kernel.org/all/20220607045650.4999-1-p-mohan@xxxxxx/ [6] https://lore.kernel.org/all/20221012114429.2341215-1-danishanwar@xxxxxx/ [7] https://lore.kernel.org/all/20221031073801.130541-1-danishanwar@xxxxxx/ [8] https://lore.kernel.org/all/20221116121634.2901265-1-danishanwar@xxxxxx/ [9] https://lore.kernel.org/all/20221118111924.3277838-1-danishanwar@xxxxxx/ [10] https://lore.kernel.org/all/20221201110500.4017889-1-danishanwar@xxxxxx/ [11] https://www.kernel.org/doc/html/v6.0/doc-guide/kernel-doc.html#structure-union-and-enumeration-documentation [12] https://lore.kernel.org/all/20220607045650.4999-7-p-mohan@xxxxxx/ Thanks and Regards, Md Danish Anwar MD Danish Anwar (2): remoteproc: pru: Add enum for PRU Core Identifiers. remoteproc: pru: Add APIs to get and put the PRU cores Roger Quadros (1): remoteproc: pru: Add pru_rproc_set_ctable() function Suman Anna (2): dt-bindings: remoteproc: Add PRU consumer bindings remoteproc: pru: Make sysfs entries read-only for PRU client driven boots Tero Kristo (1): remoteproc: pru: Configure firmware based on client setup .../bindings/remoteproc/ti,pru-consumer.yaml | 60 +++++ drivers/remoteproc/pru_rproc.c | 235 +++++++++++++++++- include/linux/pruss.h | 83 +++++++ 3 files changed, 373 insertions(+), 5 deletions(-) create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml create mode 100644 include/linux/pruss.h -- 2.25.1
