On 07/12/2022 06:54, Kunihiko Hayashi wrote: > Add DT binding schema for components belonging to the platform-specific > DWC3 USB glue layer implemented in UniPhier SoCs. > > This USB glue layer works as a sideband logic for the host controller, > including core reset, vbus control, PHYs, and some signals to the > controller. > > Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx> > --- > .../socionext,uniphier-dwc3-glue.yaml | 106 ++++++++++++++++++ > 1 file changed, 106 insertions(+) > create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml > > diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml > new file mode 100644 > index 000000000000..1b5585a5a3a2 > --- /dev/null > +++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml > @@ -0,0 +1,106 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-dwc3-glue.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Socionext UniPhier SoC DWC3 USB3.0 glue layer > + > +maintainers: > + - Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx> > + > +description: |+ > + DWC3 USB3.0 glue layer implemented on Socionext UniPhier SoCs is > + a sideband logic handling signals to DWC3 host controller inside > + USB3.0 component. > + > +properties: > + compatible: > + items: > + - enum: > + - socionext,uniphier-pro4-dwc3-glue > + - socionext,uniphier-pro5-dwc3-glue > + - socionext,uniphier-pxs2-dwc3-glue > + - socionext,uniphier-ld20-dwc3-glue > + - socionext,uniphier-pxs3-dwc3-glue > + - socionext,uniphier-nx1-dwc3-glue > + - const: simple-mfd > + > + reg: > + maxItems: 1 > + > + '#address-cells': Use consistent quotes - either ' or " > + const: 1 > + > + '#size-cells': > + const: 1 > + > + ranges: true > + > +patternProperties: > + "^reset-controller@[0-9a-f]+$": > + $ref: /schemas/reset/socionext,uniphier-glue-reset.yaml# > + > + "^regulator@[0-9a-f]+$": > + $ref: /schemas/regulator/socionext,uniphier-regulator.yaml# > + > + "^phy@[0-9a-f]+$": > + oneOf: > + - $ref: /schemas/phy/socionext,uniphier-usb3hs-phy.yaml# > + - $ref: /schemas/phy/socionext,uniphier-usb3ss-phy.yaml# > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + You need to fix Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml example. I propose to drop usb-glue@65b00000 from that file. It's not relevant to that example. Best regards, Krzysztof
