Re: [PATCH v2 15/16] dt-bindings: soc: socionext: Add UniPhier DWC3 USB glue layer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 07 Dec 2022 14:54:04 +0900, Kunihiko Hayashi wrote:
> Add DT binding schema for components belonging to the platform-specific
> DWC3 USB glue layer implemented in UniPhier SoCs.
> 
> This USB glue layer works as a sideband logic for the host controller,
> including core reset, vbus control, PHYs, and some signals to the
> controller.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
> ---
>  .../socionext,uniphier-dwc3-glue.yaml         | 106 ++++++++++++++++++
>  1 file changed, 106 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.example.dtb: usb-glue@65b00000: 'reg' is a required property
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.example.dtb: usb-glue@65b00000: 'hs-phy@200' does not match any of the regexes: '^phy@[0-9a-f]+$', '^regulator@[0-9a-f]+$', '^reset-controller@[0-9a-f]+$', 'pinctrl-[0-9]+'
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.example.dtb: usb-glue@65b00000: 'reg' is a required property
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.example.dtb: usb-glue@65b00000: 'ss-phy@300' does not match any of the regexes: '^phy@[0-9a-f]+$', '^regulator@[0-9a-f]+$', '^reset-controller@[0-9a-f]+$', 'pinctrl-[0-9]+'
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221207055405.30940-16-hayashi.kunihiko@xxxxxxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux