On 2022/12/08 17:23, Krzysztof Kozlowski wrote:
On 07/12/2022 06:54, Kunihiko Hayashi wrote:
Add DT binding schema for components belonging to the platform-specific
DWC3 USB glue layer implemented in UniPhier SoCs.
This USB glue layer works as a sideband logic for the host controller,
including core reset, vbus control, PHYs, and some signals to the
controller.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
---
.../socionext,uniphier-dwc3-glue.yaml | 106 ++++++++++++++++++
1 file changed, 106 insertions(+)
create mode 100644
Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml
diff --git
a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml
b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml
new file mode 100644
index 000000000000..1b5585a5a3a2
--- /dev/null
+++
b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id:
http://devicetree.org/schemas/soc/socionext/socionext,uniphier-dwc3-glue.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier SoC DWC3 USB3.0 glue layer
+
+maintainers:
+ - Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
+
+description: |+
+ DWC3 USB3.0 glue layer implemented on Socionext UniPhier SoCs is
+ a sideband logic handling signals to DWC3 host controller inside
+ USB3.0 component.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - socionext,uniphier-pro4-dwc3-glue
+ - socionext,uniphier-pro5-dwc3-glue
+ - socionext,uniphier-pxs2-dwc3-glue
+ - socionext,uniphier-ld20-dwc3-glue
+ - socionext,uniphier-pxs3-dwc3-glue
+ - socionext,uniphier-nx1-dwc3-glue
+ - const: simple-mfd
+
+ reg:
+ maxItems: 1
+
+ '#address-cells':
Use consistent quotes - either ' or "
I'll change it.
+ const: 1
+
+ '#size-cells':
+ const: 1
+
+ ranges: true
+
+patternProperties:
+ "^reset-controller@[0-9a-f]+$":
+ $ref: /schemas/reset/socionext,uniphier-glue-reset.yaml#
+
+ "^regulator@[0-9a-f]+$":
+ $ref: /schemas/regulator/socionext,uniphier-regulator.yaml#
+
+ "^phy@[0-9a-f]+$":
+ oneOf:
+ - $ref: /schemas/phy/socionext,uniphier-usb3hs-phy.yaml#
+ - $ref: /schemas/phy/socionext,uniphier-usb3ss-phy.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
You need to fix
Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
example. I propose to drop usb-glue@65b00000 from that file. It's not
relevant to that example.
I already fixed usb3-phy example in PATCH 6/16, however, it's better
to drop the parent node from the example not to avoid the effect of the changes.
Thank you,
---
Best Regards
Kunihiko Hayashi
