Add the device tree bindings for the MaxLinear GPY2xx PHYs. Signed-off-by: Michael Walle <michael@xxxxxxxx> --- Is the filename ok? I was unsure because that flag is only for the GPY215 for now. But it might also apply to others. Also there is no compatible string, so.. .../bindings/net/maxlinear,gpy2xx.yaml | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml diff --git a/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml b/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml new file mode 100644 index 000000000000..d71fa9de2b64 --- /dev/null +++ b/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/maxlinear,gpy2xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MaxLinear GPY2xx PHY + +maintainers: + - Andrew Lunn <andrew@xxxxxxx> + - Michael Walle <michael@xxxxxxxx> + +allOf: + - $ref: ethernet-phy.yaml# + +properties: + maxlinear,use-broken-interrupts: + description: | + Interrupts are broken on some GPY2xx PHYs in that they keep the + interrupt line asserted even after the interrupt status register is + cleared. Thus it is blocking the interrupt line which is usually bad + for shared lines. By default interrupts are disabled for this PHY and + polling mode is used. If one can live with the consequences, this + property can be used to enable interrupt handling. + + Affected PHYs (as far as known) are GPY215B and GPY215C. + type: boolean + +dependencies: + maxlinear,use-broken-interrupts: [ interrupts ] + +unevaluatedProperties: false + +examples: + - | + ethernet { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@0 { + reg = <0>; + interrupts-extended = <&intc 0>; + maxlinear,use-broken-interrupts; + }; + }; + +... -- 2.30.2
