Re: [PATCH v8 03/11] dt-bindings: clock: meson: add A1 peripheral clock controller bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02/12/2022 10:49, Dmitry Rokosov wrote:
> On Thu, Dec 01, 2022 at 10:10:04PM -0600, Rob Herring wrote:
>>
>> On Fri, 02 Dec 2022 01:56:55 +0300, Dmitry Rokosov wrote:
>>> From: Jian Hu <jian.hu@xxxxxxxxxxx>
>>>
>>> Add the documentation to support Amlogic A1 peripheral clock driver,
>>> and add A1 peripheral clock controller bindings.
>>>
>>> Signed-off-by: Jian Hu <jian.hu@xxxxxxxxxxx>
>>> Signed-off-by: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxx>
>>> ---
>>>  .../bindings/clock/amlogic,a1-clkc.yaml       | 65 ++++++++++++
>>>  include/dt-bindings/clock/a1-clkc.h           | 98 +++++++++++++++++++
>>>  2 files changed, 163 insertions(+)
>>>  create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml
>>>  create mode 100644 include/dt-bindings/clock/a1-clkc.h
>>>
>>
>> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
>> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>>
>> yamllint warnings/errors:
>>
>> dtschema/dtc warnings/errors:
>> ./Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml: $id: relative path/filename doesn't match actual path or filename
>> 	expected: http://devicetree.org/schemas/clock/amlogic,a1-clkc.yaml#
>> Documentation/devicetree/bindings/clock/amlogic,a1-clkc.example.dts:18.48-30.11: Warning (unit_address_vs_reg): /example-0/periphs-clock-controller: node has a reg or ranges property, but no unit name
>> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/amlogic,a1-clkc.example.dtb: periphs-clock-controller: reg: [[0, 2048], [0, 260]] is too long
>> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml
>>
>> doc reference errors (make refcheckdocs):
>>
>> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221201225703.6507-4-ddrokosov@xxxxxxxxxxxxxx
>>
>> The base for the series is generally the latest rc1. A different dependency
>> should be noted in *this* patch.
>>
>> If you already ran 'make dt_binding_check' and didn't see the above
>> error(s), then make sure 'yamllint' is installed and dt-schema is up to
>> date:
>>
>> pip3 install dtschema --upgrade
>>
>> Please check and re-submit after running the above command yourself. Note
>> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
>> your schema. However, it must be unset to test all examples with your schema.
>>
> 
> That's totally right warnings and errors. All of them are fixed in the
> my "fixup" patch of Jian's original dt_binding schema:
> 
> https://lore.kernel.org/linux-amlogic/20221201225703.6507-11-ddrokosov@xxxxxxxxxxxxxx/

No, this patch must be fixed. It's not correct.

Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux