On 29/11/2022 21:46, Adam Skladowski wrote:
> Add I2C/SPI nodes for SM6115.
>
> Signed-off-by: Adam Skladowski <a39.skl@xxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sm6115.dtsi | 287 +++++++++++++++++++++++++++
> 1 file changed, 287 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index e9de7aa1efdd..d14a4595be8a 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -6,6 +6,7 @@
> #include <dt-bindings/clock/qcom,gcc-sm6115.h>
> #include <dt-bindings/clock/qcom,sm6115-dispcc.h>
> #include <dt-bindings/clock/qcom,rpmcc.h>
> +#include <dt-bindings/dma/qcom-gpi.h>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/power/qcom-rpmpd.h>
> @@ -357,6 +358,90 @@ tlmm: pinctrl@500000 {
> interrupt-controller;
> #interrupt-cells = <2>;
>
> + qup_i2c0_default: qup-i2c0-default {
Does not look like you tested the bindings. Please run `make
dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).
Missing -state suffix. Same in other places.
> + pins = "gpio0", "gpio1";
> + function = "qup0";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
Best regards,
Krzysztof
