Add nodes required for TSENS block using the common qcom,tsens-v2 binding. Signed-off-by: Adam Skladowski <a39.skl@xxxxxxxxx> --- arch/arm64/boot/dts/qcom/sm6115.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index 2003a2519a54..decbf7ca8a03 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -515,6 +515,17 @@ spmi_bus: spmi@1c40000 { #interrupt-cells = <4>; }; + tsens0: thermal-sensor@4410000 { + compatible = "qcom,sm6115-tsens", "qcom,tsens-v2"; + reg = <0x04411000 0x1ff>, /* TM */ + <0x04410000 0x8>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + rpm_msg_ram: sram@45f0000 { compatible = "qcom,rpm-msg-ram"; reg = <0x045f0000 0x7000>; -- 2.25.1