These board devicetrees fail to validate because the gpio-leds schema requires its child nodes to have "led" in the node name. Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx> --- arch/arm/boot/dts/sun5i-gr8-chip-pro.dts | 2 +- arch/arm/boot/dts/sun5i-r8-chip.dts | 2 +- arch/arm/boot/dts/sun6i-a31s-sina31s.dts | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts index a32cde3e32eb..3222f1490716 100644 --- a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts +++ b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts @@ -70,7 +70,7 @@ chosen { leds { compatible = "gpio-leds"; - status { + led-status { label = "chip-pro:white:status"; gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts index 4bf4943d4eb7..303191c926c2 100644 --- a/arch/arm/boot/dts/sun5i-r8-chip.dts +++ b/arch/arm/boot/dts/sun5i-r8-chip.dts @@ -70,7 +70,7 @@ chosen { leds { compatible = "gpio-leds"; - status { + led-status { label = "chip:white:status"; gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts index 0af48e143b66..b84822453381 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts @@ -67,7 +67,7 @@ hdmi_con_in: endpoint { leds { compatible = "gpio-leds"; - status { + led-status { label = "sina31s:status:usr"; gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */ }; -- 2.37.4