On Fri, 25 Nov 2022 13:54:00 -0600
Samuel Holland <samuel@xxxxxxxxxxxx> wrote:
Hi Samuel,
> These board devicetrees fail to validate because the gpio-leds schema
> requires its child nodes to have "led" in the node name.
>
> Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx>
That looks alright, though the comment in the binding says that we
should just have led-0, led-1 instead, so just (hex) numbers. The
"status" name is also in the label, so we wouldn't lose information.
Actually, also "label" is deprecated, in favour of "color" and
"function", shall this be fixed on the way? Or is there anything that
breaks (older kernels) when removing the label property?
Cheers,
Andre
> ---
>
> arch/arm/boot/dts/sun5i-gr8-chip-pro.dts | 2 +-
> arch/arm/boot/dts/sun5i-r8-chip.dts | 2 +-
> arch/arm/boot/dts/sun6i-a31s-sina31s.dts | 2 +-
> 3 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts
> index a32cde3e32eb..3222f1490716 100644
> --- a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts
> +++ b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts
> @@ -70,7 +70,7 @@ chosen {
> leds {
> compatible = "gpio-leds";
>
> - status {
> + led-status {
> label = "chip-pro:white:status";
> gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
> default-state = "on";
> diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts
> index 4bf4943d4eb7..303191c926c2 100644
> --- a/arch/arm/boot/dts/sun5i-r8-chip.dts
> +++ b/arch/arm/boot/dts/sun5i-r8-chip.dts
> @@ -70,7 +70,7 @@ chosen {
> leds {
> compatible = "gpio-leds";
>
> - status {
> + led-status {
> label = "chip:white:status";
> gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
> default-state = "on";
> diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
> index 0af48e143b66..b84822453381 100644
> --- a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
> +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
> @@ -67,7 +67,7 @@ hdmi_con_in: endpoint {
> leds {
> compatible = "gpio-leds";
>
> - status {
> + led-status {
> label = "sina31s:status:usr";
> gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
> };
