On 21.11.2022 22:22, Luca Weiss wrote:
> From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
>
> Define the pm8841 regulators under SMD/RPM, to allow the modem
> remoteproc to set the voltage during boot of the remote processor.
>
> Entries are just copied from the Honami dts.
I hope it was supposed to be "identical to" and not "copied and hoped it
would be ok" :/
Maybe I'm a bit picky, but I suppose this is said in a misleading way..
Konrad
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
> ---
> Changes in v2:
> * new patch in this series
>
> ...-msm8974pro-sony-xperia-shinano-castor.dts | 24 +++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
> index 3f45f5c5d37b..2c33f84a6e4e 100644
> --- a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
> +++ b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
> @@ -319,6 +319,30 @@ led@7 {
> };
>
> &rpm_requests {
> + pm8841-regulators {
> + compatible = "qcom,rpm-pm8841-regulators";
> +
> + pm8841_s1: s1 {
> + regulator-min-microvolt = <675000>;
> + regulator-max-microvolt = <1050000>;
> + };
> +
> + pm8841_s2: s2 {
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1050000>;
> + };
> +
> + pm8841_s3: s3 {
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1050000>;
> + };
> +
> + pm8841_s4: s4 {
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1050000>;
> + };
> + };
> +
> pm8941-regulators {
> compatible = "qcom,rpm-pm8941-regulators";
>
