Re: [PATCH v2 0/7] Rename DTB overlay source files

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Nov 11, 2022 at 03:05:20PM -0600, Andrew Davis wrote:
> On 11/11/22 1:39 PM, Andy Shevchenko wrote:
> > On Wed, Oct 26, 2022 at 09:11:21AM -0500, Rob Herring wrote:
> > > On Mon, Oct 24, 2022 at 12:34 PM Andrew Davis <afd@xxxxxx> wrote:
> > > > 
> > > > Hello all,
> > > > 
> > > > This is a series based on my patch here[0]. As suggested by Rob
> > > > I've resurrected Frank's patch and appended it to mine as a series.
> > > > 
> > > > First patch here is my original patch, 3rd is Frank's patch but with
> > > > the unittest changes pulled out into the 2nd patch. That was re-worked
> > > > moving the source building macro into scripts/Makefile.lib.
> > > > 
> > > > Patches 4, 5, and 6 are an attempt at renaming all the existing DTB
> > > > overlays. Split out by platform so they could be taken by platform
> > > > maintainers or if easier ACK'd here and taken all together.
> > > > 
> > > > This should cover all the DTB overlays so we can remove the old .dts
> > > > rule for overlays and make .dtso the only supported way, let me know
> > > > if we want that this cycle and I can post that too.
> > > > 
> > > > Thanks,
> > > > Andrew
> > > > 
> > > > Changes from v1[1]:
> > > >   - Added patch to rename pi433 overlay.
> > > >   - Cleaned wording on patch 4-6.
> > > >   - Collected some ACKs
> > > > 
> > > > [0] https://www.spinics.net/lists/kernel/msg4548509.html
> > > > [1] https://www.spinics.net/lists/arm-kernel/msg1020165.html
> > > > 
> > > > Andrew Davis (6):
> > > >    kbuild: Allow DTB overlays to built from .dtso named source files
> > > >    kbuild: Allow DTB overlays to built into .dtso.S files
> > > >    arm64: dts: freescale: Rename DTB overlay source files from .dts to
> > > >      .dtso
> > > >    arm64: dts: renesas: Rename DTB overlay source files from .dts to
> > > >      .dtso
> > > >    arm64: dts: xilinx: Rename DTB overlay source files from .dts to .dtso
> > > >    staging: pi433: overlay: Rename overlay source file from .dts to .dtso
> > > > 
> > > > Frank Rowand (1):
> > > >    of: overlay: rename overlay source files from .dts to .dtso
> > > 
> > > I've applied patches 1-3 and 7. I'll send a PR for the branch to the
> > > platform maintainers after a few days in linux-next.
> > 
> > The patch
> > 
> > commit 941214a512d8c80d47e720c17ec17e8539175e93
> > Author: Andrew Davis <afd@xxxxxx>
> > Date:   Mon Oct 24 12:34:29 2022 -0500
> > 
> >      kbuild: Allow DTB overlays to built into .dtbo.S files
> > 
> > broke the build reproducibility / no-op builds.
> > 
> > Before:
> >    2+ execution of `make` on non-changed tree did nothing
> > 
> > Now:
> >    Each run of `make` (even without a single bit changed) restarts vmlinux
> >    rebuild.
> > 
> > Please, revert or fix.
> > 
> 
> I do not see this behavior. What config are you using?
> 
> Not sure how this patch could be the root cause, it only adds
> a build target/rule, but doesn't actually use it anywhere yet..

Just to confirm, I reverted the patch and everything went fine again,
so simple revert helps!

(Tested on today's Linux Next)

-- 
With Best Regards,
Andy Shevchenko





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux