On Wed, Oct 26, 2022 at 09:11:21AM -0500, Rob Herring wrote: > On Mon, Oct 24, 2022 at 12:34 PM Andrew Davis <afd@xxxxxx> wrote: > > > > Hello all, > > > > This is a series based on my patch here[0]. As suggested by Rob > > I've resurrected Frank's patch and appended it to mine as a series. > > > > First patch here is my original patch, 3rd is Frank's patch but with > > the unittest changes pulled out into the 2nd patch. That was re-worked > > moving the source building macro into scripts/Makefile.lib. > > > > Patches 4, 5, and 6 are an attempt at renaming all the existing DTB > > overlays. Split out by platform so they could be taken by platform > > maintainers or if easier ACK'd here and taken all together. > > > > This should cover all the DTB overlays so we can remove the old .dts > > rule for overlays and make .dtso the only supported way, let me know > > if we want that this cycle and I can post that too. > > > > Thanks, > > Andrew > > > > Changes from v1[1]: > > - Added patch to rename pi433 overlay. > > - Cleaned wording on patch 4-6. > > - Collected some ACKs > > > > [0] https://www.spinics.net/lists/kernel/msg4548509.html > > [1] https://www.spinics.net/lists/arm-kernel/msg1020165.html > > > > Andrew Davis (6): > > kbuild: Allow DTB overlays to built from .dtso named source files > > kbuild: Allow DTB overlays to built into .dtso.S files > > arm64: dts: freescale: Rename DTB overlay source files from .dts to > > .dtso > > arm64: dts: renesas: Rename DTB overlay source files from .dts to > > .dtso > > arm64: dts: xilinx: Rename DTB overlay source files from .dts to .dtso > > staging: pi433: overlay: Rename overlay source file from .dts to .dtso > > > > Frank Rowand (1): > > of: overlay: rename overlay source files from .dts to .dtso > > I've applied patches 1-3 and 7. I'll send a PR for the branch to the > platform maintainers after a few days in linux-next. The patch commit 941214a512d8c80d47e720c17ec17e8539175e93 Author: Andrew Davis <afd@xxxxxx> Date: Mon Oct 24 12:34:29 2022 -0500 kbuild: Allow DTB overlays to built into .dtbo.S files broke the build reproducibility / no-op builds. Before: 2+ execution of `make` on non-changed tree did nothing Now: Each run of `make` (even without a single bit changed) restarts vmlinux rebuild. Please, revert or fix. -- With Best Regards, Andy Shevchenko
