Re: [PATCH v2 0/7] Rename DTB overlay source files

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/11/22 1:39 PM, Andy Shevchenko wrote:
On Wed, Oct 26, 2022 at 09:11:21AM -0500, Rob Herring wrote:
On Mon, Oct 24, 2022 at 12:34 PM Andrew Davis <afd@xxxxxx> wrote:

Hello all,

This is a series based on my patch here[0]. As suggested by Rob
I've resurrected Frank's patch and appended it to mine as a series.

First patch here is my original patch, 3rd is Frank's patch but with
the unittest changes pulled out into the 2nd patch. That was re-worked
moving the source building macro into scripts/Makefile.lib.

Patches 4, 5, and 6 are an attempt at renaming all the existing DTB
overlays. Split out by platform so they could be taken by platform
maintainers or if easier ACK'd here and taken all together.

This should cover all the DTB overlays so we can remove the old .dts
rule for overlays and make .dtso the only supported way, let me know
if we want that this cycle and I can post that too.

Thanks,
Andrew

Changes from v1[1]:
  - Added patch to rename pi433 overlay.
  - Cleaned wording on patch 4-6.
  - Collected some ACKs

[0] https://www.spinics.net/lists/kernel/msg4548509.html
[1] https://www.spinics.net/lists/arm-kernel/msg1020165.html

Andrew Davis (6):
   kbuild: Allow DTB overlays to built from .dtso named source files
   kbuild: Allow DTB overlays to built into .dtso.S files
   arm64: dts: freescale: Rename DTB overlay source files from .dts to
     .dtso
   arm64: dts: renesas: Rename DTB overlay source files from .dts to
     .dtso
   arm64: dts: xilinx: Rename DTB overlay source files from .dts to .dtso
   staging: pi433: overlay: Rename overlay source file from .dts to .dtso

Frank Rowand (1):
   of: overlay: rename overlay source files from .dts to .dtso

I've applied patches 1-3 and 7. I'll send a PR for the branch to the
platform maintainers after a few days in linux-next.

The patch

commit 941214a512d8c80d47e720c17ec17e8539175e93
Author: Andrew Davis <afd@xxxxxx>
Date:   Mon Oct 24 12:34:29 2022 -0500

     kbuild: Allow DTB overlays to built into .dtbo.S files

broke the build reproducibility / no-op builds.

Before:
   2+ execution of `make` on non-changed tree did nothing

Now:
   Each run of `make` (even without a single bit changed) restarts vmlinux
   rebuild.

Please, revert or fix.


I do not see this behavior. What config are you using?

Not sure how this patch could be the root cause, it only adds
a build target/rule, but doesn't actually use it anywhere yet..

Andrew



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux