Convert to YAML dtschemas of Xilinx AXI PCIe Root Port Bridge
dt binding.
Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@xxxxxxx>
---
Changes in v4:
Modified to same style of quotes as in other places.
Removed spaces between <> of reg, ranges, interrupts properties.
---
.../devicetree/bindings/pci/xilinx-pcie.txt | 88 -------------------
.../bindings/pci/xlnx,axi-pcie-host.yaml | 88 +++++++++++++++++++
2 files changed, 88 insertions(+), 88 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/pci/xilinx-pcie.txt
create mode 100644 Documentation/devicetree/bindings/pci/xlnx,axi-pcie-host.yaml
diff --git a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
deleted file mode 100644
index fd57a81180a4..000000000000
--- a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
+++ /dev/null
@@ -1,88 +0,0 @@
-* Xilinx AXI PCIe Root Port Bridge DT description
-
-Required properties:
-- #address-cells: Address representation for root ports, set to <3>
-- #size-cells: Size representation for root ports, set to <2>
-- #interrupt-cells: specifies the number of cells needed to encode an
- interrupt source. The value must be 1.
-- compatible: Should contain "xlnx,axi-pcie-host-1.00.a"
-- reg: Should contain AXI PCIe registers location and length
-- device_type: must be "pci"
-- interrupts: Should contain AXI PCIe interrupt
-- interrupt-map-mask,
- interrupt-map: standard PCI properties to define the mapping of the
- PCI interface to interrupt numbers.
-- ranges: ranges for the PCI memory regions (I/O space region is not
- supported by hardware)
- Please refer to the standard PCI bus binding document for a more
- detailed explanation
-
-Optional properties for Zynq/Microblaze:
-- bus-range: PCI bus numbers covered
-
-Interrupt controller child node
-+++++++++++++++++++++++++++++++
-Required properties:
-- interrupt-controller: identifies the node as an interrupt controller
-- #address-cells: specifies the number of cells needed to encode an
- address. The value must be 0.
-- #interrupt-cells: specifies the number of cells needed to encode an
- interrupt source. The value must be 1.
-
-NOTE:
-The core provides a single interrupt for both INTx/MSI messages. So,
-created a interrupt controller node to support 'interrupt-map' DT
-functionality. The driver will create an IRQ domain for this map, decode
-the four INTx interrupts in ISR and route them to this domain.
-
-
-Example:
-++++++++
-Zynq:
- pci_express: axi-pcie@50000000 {
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- compatible = "xlnx,axi-pcie-host-1.00.a";
- reg = < 0x50000000 0x1000000 >;
- device_type = "pci";
- interrupts = < 0 52 4 >;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie_intc 1>,
- <0 0 0 2 &pcie_intc 2>,
- <0 0 0 3 &pcie_intc 3>,
- <0 0 0 4 &pcie_intc 4>;
- ranges = < 0x02000000 0 0x60000000 0x60000000 0 0x10000000 >;
-
- pcie_intc: interrupt-controller {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- };
- };
-
-
-Microblaze:
- pci_express: axi-pcie@10000000 {
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- compatible = "xlnx,axi-pcie-host-1.00.a";
- reg = <0x10000000 0x4000000>;
- device_type = "pci";
- interrupt-parent = <µblaze_0_intc>;
- interrupts = <1 2>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie_intc 1>,
- <0 0 0 2 &pcie_intc 2>,
- <0 0 0 3 &pcie_intc 3>,
- <0 0 0 4 &pcie_intc 4>;
- ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x10000000>;
-
- pcie_intc: interrupt-controller {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- };
-
- };
diff --git a/Documentation/devicetree/bindings/pci/xlnx,axi-pcie-host.yaml b/Documentation/devicetree/bindings/pci/xlnx,axi-pcie-host.yaml
new file mode 100644
index 000000000000..69b7decabd45
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/xlnx,axi-pcie-host.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/xlnx,axi-pcie-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx AXI PCIe Root Port Bridge
+
+maintainers:
+ - Thippeswamy Havalige <thippeswamy.havalige@xxxxxxx>
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+ compatible:
+ const: xlnx,axi-pcie-host-1.00.a
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ ranges:
+ items:
+ - description: |
+ ranges for the PCI memory regions (I/O space region is not
+ supported by hardware)
+
+ "#interrupt-cells":
+ const: 1
+
+ interrupt-controller:
+ description: identifies the node as an interrupt controller
+ type: object
+ properties:
+ interrupt-controller: true
+
+ "#address-cells":
+ const: 0
+
+ "#interrupt-cells":
+ const: 1
+
+ required:
+ - interrupt-controller
+ - "#address-cells"
+ - "#interrupt-cells"
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - ranges
+ - interrupts
+ - interrupt-map
+ - "#interrupt-cells"
+ - interrupt-controller
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ pcie@50000000 {
+ compatible = "xlnx,axi-pcie-host-1.00.a";
+ reg = <0x50000000 0x1000000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc 1>,
+ <0 0 0 2 &pcie_intc 2>,
+ <0 0 0 3 &pcie_intc 3>,
+ <0 0 0 4 &pcie_intc 4>;
+ ranges = <0x02000000 0 0x60000000 0x60000000 0 0x10000000>;
+ pcie_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
--
2.25.1
